Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
A1D00119440

A1D00119440

Manufacturer: SIEMENS

Price: On Request

AVSP (Automatic Vacuum Support Pins) Retrofit kit for a placement station SIPLACE HS-60/D4 with single conveyor. Consisting of electrical set and pneumatically set,control unit,conversion board and programming box. This must be ordered 1 time per placement station SIPLACE HS-60/D4 with single conveyor. Additionally per lifting table there are up to 3 x Pin Module AVSP SIPLACE HS-60/D4 (119639) required.

Similar items in same category:
A1D00119427 A1D00119427 Additional mechanical stopper for Long Boards at SIPLACE HS-60/D4 single conveyor. With this additional stopper the transport can handle PCB's up to 610mm x 460mm (24 inch x 18 inch) in the single or dual conveyor. For dual conveyor the stopper with item no. 119428 has to be ordered additional.
A1D00119428 A1D00119428 Additional mechanical stopper for Long Boards at SIPLACE HS-60/D4 dual conveyor. These stopper is a additional Stopper unit for the dual conveyor. Additional the Long Board Option HS-60/D4 (119427) is required. With the long board option the dual conveyor can handle PCBs up to 610mm x 216mm (24 inch x 8.5inch).
A1D00119430 A1D00119430 This item is required one time per SIPLACE HS-xx/D4/D1/D2 for installation of one or more PCB-barcode readers (1D-reader or 2D-reader heads). The following items are included: Mounting bracket (2 pcs), Distribution board (1 pcs), Assembly material and cabling. Additionally, one or more PCB Barcode Readers (item 119679 or 119682) are needed.Note: On HS-50 with dual transport a different mounting kit must be ordered (item 119330).
A1D00119439 A1D00119439 Pin Module for AVSP (Automatic Vacuum Support Pins) with 24 Support Pins. These Support Pins will be setup in a learning mode to the Topology of a PCB bottom side and can be individually configured with standard or Vacuum cups. This Pin Block must minimum be ordered 1 time per lifting table. For each placement station HS-60/D4 with single conveyor 1 x Retrofitting Kit (AVSP) SIPLACE HS-60/D4 SC 119440 should be present. For each placement station HS-60/D4 with double conveyor 1 x Retrofitting Kit (AVSP) SIPLACE HS-60/D4 DC 119441 should be present.
A1D00119441 A1D00119441 AVSP (Automatic Vacuum Support Pins) Retrofit kit for a placement station SIPLACE HS-60/D4 with double conveyor. Consisting of electrical and pneumatically set, control unit, conversion board and programming box. This retrofit kit must be ordered 1 time per placement station SIPLACE HS-60/D4 with double conveyor. Additionally per lifting table there are up to 3 x Pin Module AVSP SIPLACE HS-60/D4 (119639) required.
A1D00119445-01 A1D00119445-01 Mounting Kit, PCB-Barc.HF/X/D3 - SICK06
A1D00119455 A1D00119455 Wide board option offers the possibility to process wide PCBs on an HS60/D4. Therefore it is necessary to do some modifications at the limit switches of y-axis and to move the position of the fixed rail of the conveyor. By use of this option, boards with a width up to 508mm can be handled by an HS60/D4 with single conveyor. For dual conveyor the maximum PCB width is 242mm in dual conveyor mode and 380mm in single conveyor mode. Attention: It is not possible to use synchronous dual conveyor in combination with wide board option. Preconditions: Line software Siplace Pro 2.1 or higher, Station software 505.03 or higher.
A1D00119455-01 A1D00119455-01 WIDE BOARD OPTION OFFERS THE PO SSIBILITY TO PROCESS WIDE PCBS ON ANHS60/D4. THEREFORE IT IS N ECESSARY TO DO SOME MODIFICATIO NS AT THE LIMITSWITCHES OF Y-AX IS AND TO MOVE THE POSITION OF THE FIXED RAIL OF THECONVEYOR. BY USE OF THIS OPTION, BOARDS W ITH A WIDTH UP TO 508MM CAN BEH ANDLED BY AN HS60/D4 WITH SINGL E CONVEYOR. FOR DUAL CONVEYOR T HEMAXIMUM PCB WIDTH IS 242MM IN DUAL CONVEYOR MODE AND 380MM I N SINGLECONVEYOR MODE. ATTENTIO N: IT IS NOT POSSIBLE TO USE SY NCHRONOUS DUALCONVEYOR IN COMBI NATION WITH WIDE BOARD OPTION. PRECONDITIONS: LINE SOFTWARE SI PLACE PRO 2.1 OR HIGHER, STATIO N SOFTWARE505.03 OR HIGHER.