Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
A1D00119430

A1D00119430

Manufacturer: SIEMENS

Price: On Request

This item is required one time per SIPLACE HS-xx/D4/D1/D2 for installation of one or more PCB-barcode readers (1D-reader or 2D-reader heads). The following items are included: Mounting bracket (2 pcs), Distribution board (1 pcs), Assembly material and cabling. Additionally, one or more PCB Barcode Readers (item 119679 or 119682) are needed.Note: On HS-50 with dual transport a different mounting kit must be ordered (item 119330).

Similar items in same category:
A1D00119425 A1D00119425 Additional mechanical PCB alignment for HS-60/D4 dual conveyor: with this option PCBs with a length/width ratio >2/1 can move with the small side at the dual conveyor belts into the placement area. This option is only available for dual conveyor.
A1D00119426 A1D00119426 Additional mechanical PCB alignment for HS-60/D4 single conveyor: with this option PCBs with a length/width ratio >2/1 can move with the small side at the single conveyor belts into the placement area. This option is only available for single conveyor.
A1D00119427 A1D00119427 Additional mechanical stopper for Long Boards at SIPLACE HS-60/D4 single conveyor. With this additional stopper the transport can handle PCB's up to 610mm x 460mm (24 inch x 18 inch) in the single or dual conveyor. For dual conveyor the stopper with item no. 119428 has to be ordered additional.
A1D00119428 A1D00119428 Additional mechanical stopper for Long Boards at SIPLACE HS-60/D4 dual conveyor. These stopper is a additional Stopper unit for the dual conveyor. Additional the Long Board Option HS-60/D4 (119427) is required. With the long board option the dual conveyor can handle PCBs up to 610mm x 216mm (24 inch x 8.5inch).
A1D00119439 A1D00119439 Pin Module for AVSP (Automatic Vacuum Support Pins) with 24 Support Pins. These Support Pins will be setup in a learning mode to the Topology of a PCB bottom side and can be individually configured with standard or Vacuum cups. This Pin Block must minimum be ordered 1 time per lifting table. For each placement station HS-60/D4 with single conveyor 1 x Retrofitting Kit (AVSP) SIPLACE HS-60/D4 SC 119440 should be present. For each placement station HS-60/D4 with double conveyor 1 x Retrofitting Kit (AVSP) SIPLACE HS-60/D4 DC 119441 should be present.
A1D00119440 A1D00119440 AVSP (Automatic Vacuum Support Pins) Retrofit kit for a placement station SIPLACE HS-60/D4 with single conveyor. Consisting of electrical set and pneumatically set,control unit,conversion board and programming box. This must be ordered 1 time per placement station SIPLACE HS-60/D4 with single conveyor. Additionally per lifting table there are up to 3 x Pin Module AVSP SIPLACE HS-60/D4 (119639) required.
A1D00119441 A1D00119441 AVSP (Automatic Vacuum Support Pins) Retrofit kit for a placement station SIPLACE HS-60/D4 with double conveyor. Consisting of electrical and pneumatically set, control unit, conversion board and programming box. This retrofit kit must be ordered 1 time per placement station SIPLACE HS-60/D4 with double conveyor. Additionally per lifting table there are up to 3 x Pin Module AVSP SIPLACE HS-60/D4 (119639) required.
A1D00119445-01 A1D00119445-01 Mounting Kit, PCB-Barc.HF/X/D3 - SICK06