Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
A1D00119427
Manufacturer: SIEMENS
Price: On Request
Additional mechanical stopper for Long Boards at SIPLACE HS-60/D4 single conveyor. With this additional stopper the transport can handle PCB's up to 610mm x 460mm (24 inch x 18 inch) in the single or dual conveyor. For dual conveyor the stopper with item no. 119428 has to be ordered additional.
Similar items in same category:
A1D00119410 | The option contains a standard LCD monitor without touch function. Opera tion of the Sationssoftware and SITEST is possible only with keyboard an d trackball.Can only be ordered with a new machine (HS-60/HS-50). | |
A1D00119422 | The option contains 4 fixed feeder tables for a HS-60/HS-50, inclusive t ape container and waste container.Can only be ordered with a new machine . | |
A1D00119425 | Additional mechanical PCB alignment for HS-60/D4 dual conveyor: with this option PCBs with a length/width ratio >2/1 can move with the small side at the dual conveyor belts into the placement area. This option is only available for dual conveyor. | |
A1D00119426 | Additional mechanical PCB alignment for HS-60/D4 single conveyor: with this option PCBs with a length/width ratio >2/1 can move with the small side at the single conveyor belts into the placement area. This option is only available for single conveyor. | |
A1D00119428 | Additional mechanical stopper for Long Boards at SIPLACE HS-60/D4 dual conveyor. These stopper is a additional Stopper unit for the dual conveyor. Additional the Long Board Option HS-60/D4 (119427) is required. With the long board option the dual conveyor can handle PCBs up to 610mm x 216mm (24 inch x 8.5inch). | |
A1D00119430 | This item is required one time per SIPLACE HS-xx/D4/D1/D2 for installation of one or more PCB-barcode readers (1D-reader or 2D-reader heads). The following items are included: Mounting bracket (2 pcs), Distribution board (1 pcs), Assembly material and cabling. Additionally, one or more PCB Barcode Readers (item 119679 or 119682) are needed.Note: On HS-50 with dual transport a different mounting kit must be ordered (item 119330). | |
A1D00119439 | Pin Module for AVSP (Automatic Vacuum Support Pins) with 24 Support Pins. These Support Pins will be setup in a learning mode to the Topology of a PCB bottom side and can be individually configured with standard or Vacuum cups. This Pin Block must minimum be ordered 1 time per lifting table. For each placement station HS-60/D4 with single conveyor 1 x Retrofitting Kit (AVSP) SIPLACE HS-60/D4 SC 119440 should be present. For each placement station HS-60/D4 with double conveyor 1 x Retrofitting Kit (AVSP) SIPLACE HS-60/D4 DC 119441 should be present. | |
A1D00119440 | AVSP (Automatic Vacuum Support Pins) Retrofit kit for a placement station SIPLACE HS-60/D4 with single conveyor. Consisting of electrical set and pneumatically set,control unit,conversion board and programming box. This must be ordered 1 time per placement station SIPLACE HS-60/D4 with single conveyor. Additionally per lifting table there are up to 3 x Pin Module AVSP SIPLACE HS-60/D4 (119639) required. |