Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
7MH7142-.....
Manufacturer: SIEMENS
Price: On Request
MILLTRONICS MILLPULSE 600: HEAVY DUTY 2 WIRE MOTION SENSOR THAT PROVIDES SOLID STATE SWITCH OUTPUT TO PLC'S BETWEEN 18 TO 135 V AC OR DC.
Similar items in same category:
|
|
7MH7137-.. | Test Chains Roller test chains are used for belt scale calibration reference when material tests are not practical. All tests chains are bushed. Minimum length is 4 feet (1.2 m) |
|
|
7MH7138-.....-.... | ME 100 MOTION ALARM, POTTED STAINLESS STEEL CONSTRUCTION, IP65 |
|
|
7MH7140-.....-.... | SIEMENS MILLTRONICS ME 100 MOTION ALARM, IN TWO VERSIONS. THE HL MODEL OFFERS SELF CALIB- RATION WITH ALARM RELAY DE- ENERGISING ABOVE AND BELOW PREDETERMINED ALARM POINTS.WITH THE ZS MODEL,RELAY WILL DE-ENER GISE WHEN THE PULSE RATE DROPS BELOW 8 PULSES/MIN.BOTH MODELS ARE POTTED STAINLESS STEEL CONSTRUCTION, IP65 |
|
|
7MH7141-... | INTRINSICALLY SAFE CONTACT SWITCH / TILT SWITCH CONTROLLER (STS) ALLOWS SAFE OPERATION OF TILT SWITCH PROBES IN HAZARDOUS ENVIRONMENTS. PROVIDES ALARM INDICATION IN VISUAL OR RELAY FORM. ISCS IS FM & CSA APPROVED FOR CLASS I, DIV 1 GROUP A,B,C,& D & CLASS II DIV 1 GROUP E,F & G WHEN USED WITH A TSP OR OTHER DRY CONTACT SWITCH. STS IS FM & CSA APPROVED FOR CLASS I, DIV 1 GROUP A,B,C & D & CLASS II DIV 1 GROUP E,F & G WHEN USED WITH AN STS PROBE. |
|
|
7MH7143-..... | Tilt Switch Probe: offers a cost-effective solution for point level detection, plug chute detection, belt tracking and feed loss detection on conveyor belts. Designed for use with ISCS or STS controllers. |
|
|
7MH7144-.... | Motion Failure Alarm MFA 4p: Highly sensitive single set point motion sensor alarm unit used with MSP and XPP probes |
|
|
7MH7144-1AA2 | Motion Failure Alarm MFA 4p: Highly sensitive single set point motion sensor alarm unit used with MSP and XPP probes Enclosure: NEMA 4X, Polycarbonate enclosure Input voltage: 100/115/200/230 VAC, 50/60 Hz, switch selectable. Speed detection version: standard, underspeed (U/S) or overspeed (O/S), switch selectable Approvals: CE,RCM,EAC,KCC CSA US/C, FM |
|
|
7MH7144-1AB2 | Milltronics MFA 4p Motion failure alarm controller: set-point alarm controller, for use with MSP motion probes. Enclosure: NEMA 4X, Polycarbonate enclosure Input voltage: 100/115/200/230 VAC, 50/60 Hz, switch selectable. Speed detection version: slow speed (S/S),U/S or O/S, switch selectable Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, EAC, KC, CCSAUS, FM |