Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

7MH7140-.....-....

Manufacturer: SIEMENS

Price: On Request

SIEMENS MILLTRONICS ME 100 MOTION ALARM, IN TWO VERSIONS. THE HL MODEL OFFERS SELF CALIB- RATION WITH ALARM RELAY DE- ENERGISING ABOVE AND BELOW PREDETERMINED ALARM POINTS.WITH THE ZS MODEL,RELAY WILL DE-ENER GISE WHEN THE PULSE RATE DROPS BELOW 8 PULSES/MIN.BOTH MODELS ARE POTTED STAINLESS STEEL CONSTRUCTION, IP65

Similar items in same category:

	7MH7134-2AB30	RBSS SPEED SENSOR: HIGH RESOLUTION WHEEL-DRIVEN RETURN BELT SPEED SENSOR MODEL: 60 PULSES PER REVOLUTION FABRICATION: STANDARD POLYESTER PAINTED MILD STEEL MOUNTING OPTIONS: WITH MOUNTING KIT APPROVALS: CE, C-TICK SWITCH ISOLATOR: NOT REQUIRED
	7MH7136-.....	Incline Compensator: For use with belt scales on variable incline conveyors. Provides load signal compensation by inversely adjusting load cell excitation. Note: this device is not CE compliant
	7MH7137-..	Test Chains Roller test chains are used for belt scale calibration reference when material tests are not practical. All tests chains are bushed. Minimum length is 4 feet (1.2 m)
	7MH7138-.....-....	ME 100 MOTION ALARM, POTTED STAINLESS STEEL CONSTRUCTION, IP65
	7MH7141-...	INTRINSICALLY SAFE CONTACT SWITCH / TILT SWITCH CONTROLLER (STS) ALLOWS SAFE OPERATION OF TILT SWITCH PROBES IN HAZARDOUS ENVIRONMENTS. PROVIDES ALARM INDICATION IN VISUAL OR RELAY FORM. ISCS IS FM & CSA APPROVED FOR CLASS I, DIV 1 GROUP A,B,C,& D & CLASS II DIV 1 GROUP E,F & G WHEN USED WITH A TSP OR OTHER DRY CONTACT SWITCH. STS IS FM & CSA APPROVED FOR CLASS I, DIV 1 GROUP A,B,C & D & CLASS II DIV 1 GROUP E,F & G WHEN USED WITH AN STS PROBE.
	7MH7142-.....	MILLTRONICS MILLPULSE 600: HEAVY DUTY 2 WIRE MOTION SENSOR THAT PROVIDES SOLID STATE SWITCH OUTPUT TO PLC'S BETWEEN 18 TO 135 V AC OR DC.
	7MH7143-.....	Tilt Switch Probe: offers a cost-effective solution for point level detection, plug chute detection, belt tracking and feed loss detection on conveyor belts. Designed for use with ISCS or STS controllers.
	7MH7144-....	Motion Failure Alarm MFA 4p: Highly sensitive single set point motion sensor alarm unit used with MSP and XPP probes