Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1VB87-3XW0

2LP0800-1VB87-3XW0

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-1VB74-1VB7 2LP0800-1VB74-1VB7 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1VB74-1VJ8 2LP0800-1VB74-1VJ8 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1VB74-8SJ6 2LP0800-1VB74-8SJ6 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1VB74-8SR7 2LP0800-1VB74-8SR7 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1VB87-3YE1 2LP0800-1VB87-3YE1 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1VB88-1VD8 2LP0800-1VB88-1VD8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1VB88-1VM0 2LP0800-1VB88-1VM0 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1VC11-6BR2 2LP0800-1VC11-6BR2 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;