Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-1VB74-8SR7

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;

Similar items in same category:

	2LP0800-1VB61-6PW5	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: E/F; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1VB74-1VB7	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1VB74-1VJ8	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1VB74-8SJ6	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 10,500 Nm; Ratio: 17.493; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1VB87-3XW0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1VB87-3YE1	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1VB88-1VD8	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-1VB88-1VM0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 40.024; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;