Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0801-2DR44-7NS6

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 14; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 91.457; NOMINAL TORQUE AT LOW-SPEED SHAFT = 109,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:

	2LP0801-2DQ80-8BN7	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 14; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 80.19; NOMINAL TORQUE AT LOW-SPEED SHAFT = 109,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0801-2DQ80-8BV8	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 14; Positioning: Upright; Design: C/D; Rated torque: 109,000 Nm; Ratio: 80.190; Dynamic load rating of axial bearing Cdyn: 4,310 kN;
	2LP0801-2DR31-5KX4	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 14; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 91.457; NOMINAL TORQUE AT LOW-SPEED SHAFT = 109,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0801-2DR31-5LF5	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 14; Positioning: Upright; Design: A/B; Rated torque: 109,000 Nm; Ratio: 91.457; Dynamic load rating of axial bearing Cdyn: 4,310 kN;
	2LP0801-2DR44-7PA7	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 14; Positioning: Upright; Design: C/D; Rated torque: 109,000 Nm; Ratio: 91.457; Dynamic load rating of axial bearing Cdyn: 4,310 kN;
	2LP0801-2DR85-4XC3	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 14; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 97.02; NOMINAL TORQUE AT LOW-SPEED SHAFT = 109,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0801-2DR85-4XK4	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 14; Positioning: Upright; Design: A/B; Rated torque: 109,000 Nm; Ratio: 97.020; Dynamic load rating of axial bearing Cdyn: 4,310 kN;
	2LP0801-2DS08-7AW5	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 14; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 97.02; NOMINAL TORQUE AT LOW-SPEED SHAFT = 109,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;