Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-8UA50-2FN4

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 11; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 19.074; NOMINAL TORQUE AT LOW-SPEED SHAFT = 55,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:

	2LP0800-8UA36-0CT2	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 11; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 17.111; NOMINAL TORQUE AT LOW-SPEED SHAFT = 55,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-8UA36-0DB3	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 11; Positioning: Upright; Design: G/H; Rated torque: 59,300 Nm; Ratio: 17.111; Dynamic load rating of axial bearing Cdyn: 4,050 kN;
	2LP0800-8UA48-4JF5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 11; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 19.074; NOMINAL TORQUE AT LOW-SPEED SHAFT = 55,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-8UA48-4JN6	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 11; Positioning: Upright; Design: A/B; Rated torque: 59,300 Nm; Ratio: 19.074; Dynamic load rating of axial bearing Cdyn: 4,050 kN;
	2LP0800-8UA50-2FV5	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 11; Positioning: Upright; Design: A/B; Rated torque: 59,300 Nm; Ratio: 19.074; Dynamic load rating of axial bearing Cdyn: 4,050 kN;
	2LP0800-8UA62-6MA7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 11; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 19.074; NOMINAL TORQUE AT LOW-SPEED SHAFT = 55,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-8UA62-6MH8	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 11; Positioning: Upright; Design: C/D; Rated torque: 59,300 Nm; Ratio: 19.074; Dynamic load rating of axial bearing Cdyn: 4,050 kN;
	2LP0800-8UA63-4JH6	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 11; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 19.074; NOMINAL TORQUE AT LOW-SPEED SHAFT = 55,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;