Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-7RT80-1PB2

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 88.748; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:

	2LP0800-7RT65-8LG0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 79.046; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-7RT65-8LP1	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 10; Positioning: Upright; Design: G/H; Rated torque: 43,800 Nm; Ratio: 79.046; Dynamic load rating of axial bearing Cdyn: 3,400 kN;
	2LP0800-7RT78-3RT3	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 88.748; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-7RT78-3SB4	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 10; Positioning: Upright; Design: A/B; Rated torque: 43,800 Nm; Ratio: 88.748; Dynamic load rating of axial bearing Cdyn: 3,400 kN;
	2LP0800-7RT80-1PJ3	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 10; Positioning: Upright; Design: A/B; Rated torque: 43,800 Nm; Ratio: 88.748; Dynamic load rating of axial bearing Cdyn: 3,400 kN;
	2LP0800-7RU02-5UN5	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 88.748; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-7RU02-5UV6	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 10; Positioning: Upright; Design: C/D; Rated torque: 43,800 Nm; Ratio: 88.748; Dynamic load rating of axial bearing Cdyn: 3,400 kN;
	2LP0800-7RU03-3RV4	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 88.748; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;