Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-7AQ48-5QB7

2LP0800-7AQ48-5QB7

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 20.012; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-7AQ35-3MG5 2LP0800-7AQ35-3MG5 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 20.012; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-7AQ35-3MP6 2LP0800-7AQ35-3MP6 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 10; Positioning: Transverse; Design: B; Rated torque: 42,200 Nm; Ratio: 20.012; Dynamic load rating of axial bearing Cdyn: 3,400 kN;
2LP0800-7AQ47-7ST8 2LP0800-7AQ47-7ST8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 20.012; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-7AQ47-7TC0 2LP0800-7AQ47-7TC0 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 10; Positioning: Transverse; Design: C; Rated torque: 42,200 Nm; Ratio: 20.012; Dynamic load rating of axial bearing Cdyn: 3,400 kN;
2LP0800-7AQ48-5QJ8 2LP0800-7AQ48-5QJ8 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 10; Positioning: Transverse; Design: C; Rated torque: 42,200 Nm; Ratio: 20.012; Dynamic load rating of axial bearing Cdyn: 3,400 kN;
2LP0800-7AQ62-0VP1 2LP0800-7AQ62-0VP1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 20.012; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-7AQ62-0VW2 2LP0800-7AQ62-0VW2 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 10; Positioning: Transverse; Design: D; Rated torque: 42,200 Nm; Ratio: 20.012; Dynamic load rating of axial bearing Cdyn: 3,400 kN;
2LP0800-7AQ62-7SW0 2LP0800-7AQ62-7SW0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 20.012; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;