Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-6MW41-1NM4

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 70.787; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:

	2LP0800-6MW26-8KS2	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 70.787; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-6MW26-8LA3	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 9; Positioning: Upright; Design: C/D; Rated torque: 35,700 Nm; Ratio: 70.787; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6MW40-3RE5	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 70.787; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-6MW40-3RM6	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 9; Positioning: Upright; Design: E/F; Rated torque: 35,700 Nm; Ratio: 70.787; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6MW41-1NU5	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 9; Positioning: Upright; Design: E/F; Rated torque: 35,700 Nm; Ratio: 70.787; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6MW53-5TY7	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 70.787; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-6MW53-5UG8	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 9; Positioning: Upright; Design: G/H; Rated torque: 35,700 Nm; Ratio: 70.787; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6MW54-3RG6	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 70.787; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;