Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-6LD64-3SV1

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 14.152; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:

	2LP0800-6LD51-1QA8	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 14.152; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-6LD51-1QJ0	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 9; Positioning: Upright; Design: E/F; Rated torque: 33,700 Nm; Ratio: 14.152; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6LD51-8MH7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 14.152; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-6LD51-8MQ8	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 9; Positioning: Upright; Design: E/F; Rated torque: 33,700 Nm; Ratio: 14.152; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6LD64-3TD2	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 9; Positioning: Upright; Design: G/H; Rated torque: 33,700 Nm; Ratio: 14.152; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6LD65-1QD0	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 14.152; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-6LD65-1QL1	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 9; Positioning: Upright; Design: G/H; Rated torque: 33,700 Nm; Ratio: 14.152; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6LD77-5VQ3	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 15.962; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;