Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-6LA63-4EG5

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 8.018; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:

	2LP0800-6LA50-2BM3	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 8.018; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-6LA50-2BU4	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 9; Positioning: Upright; Design: E/F; Rated torque: 33,700 Nm; Ratio: 8.018; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6LA62-6GY6	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 8.018; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-6LA62-6HG7	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 9; Positioning: Upright; Design: G/H; Rated torque: 33,700 Nm; Ratio: 8.018; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6LA63-4EP6	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 9; Positioning: Upright; Design: G/H; Rated torque: 33,700 Nm; Ratio: 8.018; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6LA75-8KT8	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 8.904; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-6LA75-8LC0	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 9; Positioning: Upright; Design: A/B; Rated torque: 33,700 Nm; Ratio: 8.904; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-6LA76-6HB7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 8.904; NOMINAL TORQUE AT LOW-SPEED SHAFT = 31,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;