Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-5XL62-3KC2

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 79.049; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:

	2LP0800-5XL48-1GH0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 79.049; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-5XL48-1GQ1	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 9; Positioning: Transverse; Design: B; Rated torque: 35,700 Nm; Ratio: 79.049; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-5XL61-5MU3	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 79.049; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-5XL61-5NC4	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 9; Positioning: Transverse; Design: C; Rated torque: 35,700 Nm; Ratio: 79.049; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-5XL62-3KK3	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 9; Positioning: Transverse; Design: C; Rated torque: 35,700 Nm; Ratio: 79.049; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-5XL74-7QP5	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 79.049; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-5XL74-7QW6	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 9; Positioning: Transverse; Design: D; Rated torque: 35,700 Nm; Ratio: 79.049; Dynamic load rating of axial bearing Cdyn: 2,600 kN;
	2LP0800-5XL75-5MW4	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 79.049; NOMINAL TORQUE AT LOW-SPEED SHAFT = 34,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;