Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-5KQ43-5QK7

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 79.267; NOMINAL TORQUE AT LOW-SPEED SHAFT = 25,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:

	2LP0800-5KQ30-3MQ5	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 70.651; NOMINAL TORQUE AT LOW-SPEED SHAFT = 25,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-5KQ30-3MX6	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 8; Positioning: Upright; Design: G/H; Rated torque: 27,200 Nm; Ratio: 70.651; Dynamic load rating of axial bearing Cdyn: 2,360 kN;
	2LP0800-5KQ42-7TC8	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 79.267; NOMINAL TORQUE AT LOW-SPEED SHAFT = 25,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-5KQ42-7TL0	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 8; Positioning: Upright; Design: A/B; Rated torque: 27,200 Nm; Ratio: 79.267; Dynamic load rating of axial bearing Cdyn: 2,360 kN;
	2LP0800-5KQ43-5QS8	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 8; Positioning: Upright; Design: A/B; Rated torque: 27,200 Nm; Ratio: 79.267; Dynamic load rating of axial bearing Cdyn: 2,360 kN;
	2LP0800-5KQ56-0VX1	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 79.267; NOMINAL TORQUE AT LOW-SPEED SHAFT = 25,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-5KQ56-0WF2	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 8; Positioning: Upright; Design: C/D; Rated torque: 27,200 Nm; Ratio: 79.267; Dynamic load rating of axial bearing Cdyn: 2,360 kN;
	2LP0800-5KQ56-7TF0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 79.267; NOMINAL TORQUE AT LOW-SPEED SHAFT = 25,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;