Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-4FQ84-2WT8

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 43.221; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:

	2LP0800-4FQ71-0TY6	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 39.292; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-4FQ71-0UG7	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 7; Positioning: Upright; Design: G/H; Rated torque: 21,700 Nm; Ratio: 39.292; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4FQ83-5AM0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 43.221; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-4FQ83-5AU1	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 7; Positioning: Upright; Design: A/B; Rated torque: 21,700 Nm; Ratio: 43.221; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4FQ84-2XC0	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 7; Positioning: Upright; Design: A/B; Rated torque: 21,700 Nm; Ratio: 43.221; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4FR06-7DG2	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 43.221; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-4FR06-7DP3	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 7; Positioning: Upright; Design: C/D; Rated torque: 21,700 Nm; Ratio: 43.221; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4FR07-5AP1	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 43.221; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;