Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-4FP24-6PB4

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 31.433; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:

	2LP0800-4FP11-4LG2	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 31.433; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-4FP11-4LP3	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 7; Positioning: Upright; Design: A/B; Rated torque: 21,700 Nm; Ratio: 31.433; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4FP23-8RT5	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 31.433; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-4FP23-8SB6	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 7; Positioning: Upright; Design: C/D; Rated torque: 21,700 Nm; Ratio: 31.433; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4FP24-6PJ5	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 7; Positioning: Upright; Design: C/D; Rated torque: 21,700 Nm; Ratio: 31.433; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4FP37-1UN7	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 31.433; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-4FP37-1UV8	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 7; Positioning: Upright; Design: E/F; Rated torque: 21,700 Nm; Ratio: 31.433; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4FP37-8RV6	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 31.433; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;