Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-4DA32-0HT8

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 11.807; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:

	2LP0800-4DA17-7EY6	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 11.807; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-4DA17-7FG7	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: E/F; Rated torque: 20,200 Nm; Ratio: 11.807; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4DA18-5CG5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 11.807; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-4DA18-5CP6	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: E/F; Rated torque: 20,200 Nm; Ratio: 11.807; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4DA32-0JC0	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: G/H; Rated torque: 20,200 Nm; Ratio: 11.807; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4DA32-7FB7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 11.807; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-4DA32-7FJ8	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: G/H; Rated torque: 20,200 Nm; Ratio: 11.807; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4DV21-4MU6	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 17.598; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;