Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-4CG81-1AA6

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: E/F; Rated torque: 20,300 Nm; Ratio: 10.648; Dynamic load rating of axial bearing Cdyn: 2,080 kN;

Similar items in same category:

	2LP0800-4CG66-7WF4	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: C/D; Rated torque: 20,300 Nm; Ratio: 10.648; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4CG80-3CK6	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-4CG80-3CS7	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: E/F; Rated torque: 20,300 Nm; Ratio: 10.648; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4CG81-0YS5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-4CH03-5FE8	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-4CH03-5FN0	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: G/H; Rated torque: 20,300 Nm; Ratio: 10.648; Dynamic load rating of axial bearing Cdyn: 2,080 kN;
	2LP0800-4CH04-3CM7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-4CH04-3CU8	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 7; Positioning: Upright; Design: G/H; Rated torque: 20,300 Nm; Ratio: 10.648; Dynamic load rating of axial bearing Cdyn: 2,080 kN;