Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-3BV54-7SH4

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 16; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 19.765; NOMINAL TORQUE AT LOW-SPEED SHAFT = 160,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:

	2LP0800-3BV41-5PN2	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 6; Positioning: Upright; Design: G/H; Rated torque: 15,500 Nm; Ratio: 76.279; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-3BV42-3LN0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 76.279; NOMINAL TORQUE AT LOW-SPEED SHAFT = 14,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-3BV42-3LV1	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 6; Positioning: Upright; Design: G/H; Rated torque: 15,500 Nm; Ratio: 76.279; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-3BV54-7SA3	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 19.765; NOMINAL TORQUE AT LOW-SPEED SHAFT = 160,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-3BV55-5PH2	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 86.44; NOMINAL TORQUE AT LOW-SPEED SHAFT = 14,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-3BV55-5PQ3	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 6; Positioning: Upright; Design: A/B; Rated torque: 15,500 Nm; Ratio: 86.440; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-3BV68-0UU5	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 19.765; NOMINAL TORQUE AT LOW-SPEED SHAFT = 160,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-3BV68-0VC6	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 16; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 19.765; NOMINAL TORQUE AT LOW-SPEED SHAFT = 160,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;