Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-2YE66-5RH7

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Upright; Design: C/D; Rated torque: 14,400 Nm; Ratio: 17.111; Dynamic load rating of axial bearing Cdyn: 1,630 kN;

Similar items in same category:

	2LP0800-2YE53-3NN5	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Upright; Design: A/B; Rated torque: 14,400 Nm; Ratio: 17.111; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2YE65-7TS7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 40.284; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2YE65-7UA8	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 16; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 40.284; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2YE66-5RA6	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 17.111; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2YE80-0WN0	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 40.284; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2YE80-0WV1	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 16; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 40.284; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2YE80-7TU8	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 17.111; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2YE80-7UD0	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Upright; Design: E/F; Rated torque: 14,400 Nm; Ratio: 17.111; Dynamic load rating of axial bearing Cdyn: 1,630 kN;