Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-2YD06-2LH4

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 16; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 28.036; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:

	2LP0800-2YC83-0HN2	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 16; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 28.036; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2YC83-7EN0	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 9.778; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2YC83-7EV1	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Upright; Design: C/D; Rated torque: 14,400 Nm; Ratio: 9.778; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2YD06-2LA3	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 28.036; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2YD07-0HH2	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 9.778; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2YD07-0HQ3	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Upright; Design: E/F; Rated torque: 14,400 Nm; Ratio: 9.778; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2YD20-4NU5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 28.036; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2YD20-4PC6	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 16; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 28.036; NOMINAL TORQUE AT LOW-SPEED SHAFT = 173,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;