Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-2MG75-1AB5

2LP0800-2MG75-1AB5

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 13.844; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-2MG61-7WG3 2LP0800-2MG61-7WG3 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2MG61-7WP4 2LP0800-2MG61-7WP4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2MG74-3CT6 2LP0800-2MG74-3CT6 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 13.844; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2MG74-3DB7 2LP0800-2MG74-3DB7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 13.844; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2MG75-1AJ6 2LP0800-2MG75-1AJ6 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 13.844; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2MG87-5FN8 2LP0800-2MG87-5FN8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 13.844; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2MG87-5FW0 2LP0800-2MG87-5FW0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 13.844; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2MG88-3CV7 2LP0800-2MG88-3CV7 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 13.844; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;