Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-2MD72-5SF3

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 7.941; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:

	2LP0800-2LH83-1NE5	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: D; Rated torque: 13,900 Nm; Ratio: 27.725; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2LH83-8KE3	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 27.725; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2LH83-8KM4	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: D; Rated torque: 13,900 Nm; Ratio: 27.725; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2MD72-5RX2	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 7.941; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2MD73-3PF1	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 7.941; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2MD73-3PN2	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 7.941; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2MD85-7US4	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 7.941; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2MD85-7VA5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 7.941; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;