Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-2KM40-4SY6

2LP0800-2KM40-4SY6

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-2KM26-2QE4 2LP0800-2KM26-2QE4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2KM26-2QM5 2LP0800-2KM26-2QM5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2KM38-6VR7 2LP0800-2KM38-6VR7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2KM38-6VY8 2LP0800-2KM38-6VY8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2KM40-4TG7 2LP0800-2KM40-4TG7 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2KM52-8YM0 2LP0800-2KM52-8YM0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2KM52-8YU1 2LP0800-2KM52-8YU1 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2KM53-6VT8 2LP0800-2KM53-6VT8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 31.412; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;