Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-2JT33-1DD6

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 17.111; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:

	2LP0800-2JT18-8AJ4	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 17.111; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2JT18-8AR5	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: A; Rated torque: 14,400 Nm; Ratio: 17.111; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2JT20-5WR3	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 17.111; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2JT20-5WY4	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: A; Rated torque: 14,400 Nm; Ratio: 17.111; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2JT33-1DL7	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: B; Rated torque: 14,400 Nm; Ratio: 17.111; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2JT33-8AL5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 17.111; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2JT33-8AT6	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: B; Rated torque: 14,400 Nm; Ratio: 17.111; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2JT46-3FX8	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 17.111; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;