Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1XP21-4VL1

2LP0800-1XP21-4VL1

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 27.451; NOMINAL TORQUE AT LOW-SPEED SHAFT = 38,900 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-1XP07-2SQ8 2LP0800-1XP07-2SQ8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 27.451; NOMINAL TORQUE AT LOW-SPEED SHAFT = 38,900 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1XP07-2SY0 2LP0800-1XP07-2SY0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 27.451; NOMINAL TORQUE AT LOW-SPEED SHAFT = 38,900 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1XP20-6YD2 2LP0800-1XP20-6YD2 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 27.451; NOMINAL TORQUE AT LOW-SPEED SHAFT = 38,900 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1XP20-6YL3 2LP0800-1XP20-6YL3 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 27.451; NOMINAL TORQUE AT LOW-SPEED SHAFT = 38,900 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1XP21-4VT2 2LP0800-1XP21-4VT2 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 27.451; NOMINAL TORQUE AT LOW-SPEED SHAFT = 38,900 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1XP34-0BX4 2LP0800-1XP34-0BX4 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 28.49; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1XP34-0CF5 2LP0800-1XP34-0CF5 FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 5; Positioning: Upright; Design: A/B; Rated torque: 11,600 Nm; Ratio: 28.490; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1XP34-6YF3 2LP0800-1XP34-6YF3 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 28.49; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;