Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-1UJ20-0JN3

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: C/D; Rated torque: 11,200 Nm; Ratio: 19.534; Dynamic load rating of axial bearing Cdyn: 1,560 kN;

Similar items in same category:

	2LP0800-1UJ05-7FT1	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: A/B; Rated torque: 11,200 Nm; Ratio: 19.534; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1UJ18-2LX3	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 19.534; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1UJ18-2MF4	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: C/D; Rated torque: 11,200 Nm; Ratio: 19.534; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1UJ20-0JF2	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 19.534; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-1UJ32-4PS5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 19.534; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1UJ32-4QA6	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: E/F; Rated torque: 11,200 Nm; Ratio: 19.534; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1UJ33-2MA4	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 19.534; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-1UJ33-2MH5	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: E/F; Rated torque: 11,200 Nm; Ratio: 19.534; Dynamic load rating of axial bearing Cdyn: 1,560 kN;