Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1JC77-7EW0

2LP0800-1JC77-7EW0

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-1JC64-5CB7 2LP0800-1JC64-5CB7 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1JC64-5CJ8 2LP0800-1JC64-5CJ8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1JC77-0HP1 2LP0800-1JC77-0HP1 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1JC77-0HW2 2LP0800-1JC77-0HW2 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1JC77-7FE1 2LP0800-1JC77-7FE1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1JD01-2LJ3 2LP0800-1JD01-2LJ3 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 28.49; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1JD01-2LR4 2LP0800-1JD01-2LR4 FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 5; Positioning: Transverse; Design: A; Rated torque: 11,600 Nm; Ratio: 28.490; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1JD02-0HR2 2LP0800-1JD02-0HR2 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 28.49; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;