Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1JC51-2YP6

2LP0800-1JC51-2YP6

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-1JC37-0VU4 2LP0800-1JC37-0VU4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1JC50-5BY6 2LP0800-1JC50-5BY6 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1JC50-5CG7 2LP0800-1JC50-5CG7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1JC51-2YG5 2LP0800-1JC51-2YG5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1JC63-7ET8 2LP0800-1JC63-7ET8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1JC63-7FC0 2LP0800-1JC63-7FC0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1JC64-5CB7 2LP0800-1JC64-5CB7 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1JC64-5CJ8 2LP0800-1JC64-5CJ8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 26.456; NOMINAL TORQUE AT LOW-SPEED SHAFT = 23,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;