Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-1EW48-0QB8

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: D; Rated torque: 11,200 Nm; Ratio: 15.581; Dynamic load rating of axial bearing Cdyn: 1,560 kN;

Similar items in same category:

	2LP0800-1EW34-7MG6	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: C; Rated torque: 11,200 Nm; Ratio: 15.581; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1EW35-5JG4	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 15.581; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-1EW35-5JP5	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: C; Rated torque: 11,200 Nm; Ratio: 15.581; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1EW48-0PT7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 15.581; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1EW48-7MB6	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 15.581; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-1EW48-7MJ7	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: D; Rated torque: 11,200 Nm; Ratio: 15.581; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1EW62-2SP0	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 19.534; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1EW62-2SW1	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: A; Rated torque: 11,200 Nm; Ratio: 19.534; Dynamic load rating of axial bearing Cdyn: 1,560 kN;