Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1EU52-0AL8

2LP0800-1EU52-0AL8

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 8.652; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-1EU37-6WR6 2LP0800-1EU37-6WR6 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 8.652; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1EU37-6WY7 2LP0800-1EU37-6WY7 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: B; Rated torque: 11,200 Nm; Ratio: 8.652; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1EU38-4TY5 2LP0800-1EU38-4TY5 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 8.652; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1EU38-4UG6 2LP0800-1EU38-4UG6 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: B; Rated torque: 11,200 Nm; Ratio: 8.652; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1EU52-0AU0 2LP0800-1EU52-0AU0 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: C; Rated torque: 11,200 Nm; Ratio: 8.652; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1EU52-6WT7 2LP0800-1EU52-6WT7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 8.652; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1EU52-6XB8 2LP0800-1EU52-6XB8 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: C; Rated torque: 11,200 Nm; Ratio: 8.652; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1EU65-2DG1 2LP0800-1EU65-2DG1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 8.652; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;