Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-0QK51-3MA7

2LP0800-0QK51-3MA7

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 34.121; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-0QK37-1JF5 2LP0800-0QK37-1JF5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 34.121; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0QK37-1JN6 2LP0800-0QK37-1JN6 FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 4; Positioning: Upright; Design: E/F; Rated torque: 6,500 Nm; Ratio: 34.121; Dynamic load rating of axial bearing Cdyn: 1,370 kN;
2LP0800-0QK37-8FN4 2LP0800-0QK37-8FN4 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 34.121; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0QK37-8FV5 2LP0800-0QK37-8FV5 FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 4; Positioning: Upright; Design: E/F; Rated torque: 6,500 Nm; Ratio: 34.121; Dynamic load rating of axial bearing Cdyn: 1,370 kN;
2LP0800-0QK51-3MH8 2LP0800-0QK51-3MH8 FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 4; Positioning: Upright; Design: G/H; Rated torque: 6,500 Nm; Ratio: 34.121; Dynamic load rating of axial bearing Cdyn: 1,370 kN;
2LP0800-0QK52-1JH6 2LP0800-0QK52-1JH6 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 34.121; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0QK52-1JQ7 2LP0800-0QK52-1JQ7 FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 4; Positioning: Upright; Design: G/H; Rated torque: 6,500 Nm; Ratio: 34.121; Dynamic load rating of axial bearing Cdyn: 1,370 kN;
2LP0800-0QK64-5PV0 2LP0800-0QK64-5PV0 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 39.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;