Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
![2LP0800-0DN23-7HF5](/img/prod/noimage.png)
2LP0800-0DN23-7HF5
Manufacturer: SIEMENS
Price: On Request
FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
Similar items in same category:
![]() |
2LP0800-0DN10-5EL3 | FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480; |
![]() |
2LP0800-0DN10-5ET4 | FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480; |
![]() |
2LP0800-0DN11-3BT2 | FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1; |
![]() |
2LP0800-0DN11-3CB3 | FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1; |
![]() |
2LP0800-0DN23-7HN6 | FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480; |
![]() |
2LP0800-0DN24-5EN4 | FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1; |
![]() |
2LP0800-0DN24-5EV5 | FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1; |
![]() |
2LP0800-0DN37-0LA7 | FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 12.444; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480; |