Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
A5E03873569
Manufacturer: SIEMENS
Price: On Request
7ML5425XDA113CE1,X=1292mm Sliding waveguide Antenna Material - Sliding waveguide system with 1292 mm waveguide Flat Faced Flanges (316L SS) DN 150 PN 16,TypeA,flat faced Communication/Output: PA Process Seal/Gasket Nitrile (-40 to +100 C), Enclosure/Cable Inlet Aluminum, Epoxy painted, 2 x M20 x 1.5, Siemens LUI Interface Horn size/Waveguide options 100 mm (4") horn, for stillpipe applications only Approval:ATEX II 1 G EEx ia IIC T4,IS with suitable barrier Pressure rating 0.5 bar
Similar items in same category:
|
|
A5E03868457 | Milltronics MSI Belt Scale CSTM MSI,7MH71221AU511A, 55-65 IDL MNT. Scale Construction: Standard duty Belt width and 'A' dimension: 36", 'A' = 45" (1143 mm) Load cell capacity 750 lb (340.2 kg). Fabrication: Polyester painted mild steel System specification: Standard MSI and MMI Note: Standard Idler Mounts of the 18"-54" MSI are replaced with standard Idler Mounts from the 55"-65". This MSI will have standard (18"-54") hanger brackets. |
|
|
A5E03870005 | 7ML11061XA200A, X=280FT ECHOMAX XPS-10 TRANSDUCER HIGH-FREQUENCY ULTRASONIC TRANSDUCER DESIGNED FOR A WIDE VARIETY OF LIQUID AND SOLID APPLICATIONS, FOR USE WITH APPROVED CONTROLLERS. INCLUDES INTEGRAL TEMPERATURE SENSOR. MEASURING RANGE: MIN. 0.3M, MAX. 10M |
|
|
A5E03873398 | SPARE, E-40 FLOWGUIDE, 6", MS, Pwdr Pnt Flowguide Size: 6 inch ASME flange pattern Flowguide Construction: Mild Steel, Polyester Painted NOTE: The CEG cannot ensure the existing equipment when combined with the replacement flowguide, will work for the intended application. Please contact the ESG to verify the application. |
|
|
A5E03873548 | 7ML54231XX313CG1,XX=DN50PN16 TYPE E ANTENNA MATERIAL PTFE - USES ANTENNA ADAPTER PROCESS CONNECTION G 2" ASSEMBLED TO DN50PN16 1092-1 TYPE E FLANGE ANTENNA EXTENSIONS OR 100 MM (4") EXTENSION, 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET FKM O-RING ENCLOSURE/CABLE INLET ALUMINUM EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI COMMUNICATION/OUTPUT 4-20 mA HART,START-UP AT<3.6MA APPROVAL:ATEX II 1/2 G EEX EM IA IIC T4,NO BARRIER REQ. PRESSURE RATING 0.5 BAR MAX |
|
|
A5E03874760 | 7ML54270XX000AE0,XX=DN50 PN40 B1,2" Horn Process Connection and Antenna Material 316L stainless steel, PTFE emitter, FKM seal Process Connection DN50 PN25/40 DIN EN 1092-1 type B1 raised faced Antenna: 2" horn (fits 2" ASME or DN 50 nozzles) Output / Communication 4 to 20 mA, HART Cable inlet: 2 x M20 x 1.5 Area classification Intrinsically Safe, IECEx/ATEX II 1 GD Ex ia IIC T4, Ex tD A20 IP67 T90C,R(&)TTE,C-TICK,INMETRO Pressure:per curves in manual |
|
|
A5E03874761 | 7ML54270XX000AE1,XX=DN80 PN40 B1,3" HORN PROCESS CONNECTION AND ANTENNA MATERIAL 316L STAINLESS STEEL, PTFE emitter, FKM SEAL PROCESS CONNECTION DN80 PN25/40 DIN EN 1092-1 TYPE B1 RAISED FACED ANTENNA 3" HORN (FITS 3" ASME OR DN 80 NOZZLES) OUTPUT / COMMUNICATION 4 TO 20 MA, HART CABLE INLET 2 X M20 X 1.5 AREA CLASSIFICATION INTRINSICALLY SAFE, IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C,R(&)TTE,C-Tick,INMETRO PRESSURE:PER CURVES IN MANUAL |
|
|
A5E03874763 | 7ML54270XX000AE1,XX=DN100 PN16 B1,4" HORN PROCESS CONNECTION AND ANTENNA MATERIAL 316L STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION DN100 PN10/16 DIN EN 1092-1 TYPE B1 RAISED FACED ANTENNA: 4" HORN (FITS 4" ASME OR DN 100 NOZZLES) OUTPUT / COMMUNICATION 4 TO 20 MA, HART CABLE INLET 2 X M20 X 1.5 AREA CLASSIFICATION INTRINSICALLY SAFE, IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C, R(&)TTE,C-Tick,INMETRO PRESSURE:PER CURVES IN MANUAL |
|
|
A5E03877124 | 7ML56506EG000DBX-Y02-500, Y01=850MM Process Connection DN 50, PN 16 Length: Y01=850mm Thermal Isolator Without thermal isolator Wetted Seals FKM Probe Material 316L Stainless Steel with PFA lining and PEEK Isolators Approvals Flameproof Enclosure With IS Probe: Enclosure Aluminum epoxy coated 2 x M20 x 1.5 cable inlet, IP65 Active Shield Length Y01=500mm Total insertion length Y01=850mm |