Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

A5E03484605

Manufacturer: SIEMENS

Price: On Request

*Repair part* Cable harness for current converter HX

Similar items in same category:

	A5E03481952	SITRANS PROBE LU 7ML5221-2DA18-400FT CABLE POTTED FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY ESTIMATE PREVIOUSLY PROVIDED BY THE CEG TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER.
	A5E03481975	HMI NET Panel 46" replacement part, audio module NETPANEL
	A5E03482920	7ML54130JB201BA0,C12,Y15 Antenna Material: PTFE Process Connection: 6" ASME, 150 lb, flat faced Extensions / Shield: 100 mm (4") extension, PTFE Process Seal: Integral Gasket Display/Cable inlet:LUI/M20 Communication: PA,Modbus Approvals: GP, CE, CSA Pressure rating: rating per pressure/temperature curves in instruction manual C12 3.1 certificate Y15 59EF-LIT-0001
	A5E03483084	LR250 WITH 4"300LB RF,NACE MR 0 175 PC MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER SEAL: FKM PROCESS CONNECTION: 4" ASME, 300 LB, RAISED FACED COMMUNICATION: 4-20MA HART, START-UP AT <3.6MA CABLE INLET: ALUMINUM, EPOXY PAINT, 2 X 1/2" NPT ANTENNA: 4" HORN (FITS 4" ASME OR DN 100 NOZZLES) APPROVALS: CSA/FM CLASS I, II AND III,DIV.1,GR.A-G,FCC,C-TICK PRESSURE RATING: 0.5 BAR (7.5 PSI G) MAXIMUM CERTIFICATE: FLANGE CONFORMS TO NACE MR 0 175; Y15
	A5E03485326	No description available.
	A5E03488620	LR200 WITH 300MM SHIELDED ROD MLFB: 7ML54231MAX13CE0, X=300MM SS SHIELD ANTENNA MATERIAL- PTFE-USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW PROCESS CONNECTION- 2" NPT ((TAPER), ANSI/ASME B1.20.1) ANTENNA EXTENSIONS-300 MM 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET-FKM O-RING ENCLOSURE/CABLE INLET- ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5 COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <3.6MA APPROVAL CSA CLASS I AND II, DIV I, GROUPS A, B, C, D, G, 6.3 GHZ
	A5E03489541	*Spare part* CAN controller PCI
	A5E03490114	7ML55170AC241AA1,Cryogenic Version: Y01 = 600mm, 16mm PFA insulated Rod Process Connection: 2" ASME 300lb Flange, Single piece flange, raised face Approvals: ATEX II 1/2 GD Eex d (ia) IIC T6 to T1 Enclsoure/Cable inlet: 2 x 1/2" NPT IP68 Options: None Thermal isolator: Provided with thermal isolator Electrical output: 2-wire loop current 4 to 20 mA (transmitter MSP2002-2_3300 pF) Y02: 50mm Extras: Cryogenic Test Cert. (Tested in Liquid Nitrogen at -196 C) provided