Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
A1D50119825-99

A1D50119825-99

Manufacturer: SIEMENS

Price: On Request

USED Waffle-Pack Changer for SIPLACE D1 combined with fixed component table for transport height 830/900/930/950mm.Storage capacity of 28 WTC (Waffle Pack Tray Carrier), max. Size of Waffle Pack Tray 341mm x 235mm x 15mm. Tray changeover time: 1.9s (over 1 level). 10 feeder locations required for Waffle-Pack Changer. Supply voltages: 3-204/230V, 3- 380/400/415V. -Price upon inquiry-

Similar items in same category:
A1D50119780-99 A1D50119780-99 USED: 4 Gantry SMD placement station with a maximum placement rate of 80.000 cph. For details see valid scope of delivery. The placement station offers a setup capacity of 160 x 8mm feeders when using the X-feeder type. Depending on customer requirements, SIPLACE X4 can be equipped with 20-segment Collect and Place (item no: 119732), 12-segment Collect and Place (item no: 119731) or 6-segment Collect and Place heads (item no:119730) each head includes a component camera. The heads should be ordered separately with the placement station, one head must be ordered for each gantry of the placement station. The following head combinations are possible. Placement area 1: 20/20, 12/12, 6/6. Placement area 2: 20/20, 12/12, 12/6, 6/6, 6/12. If placement area 2 is equipped with 20-segment collect and place heads then area 1 must also be configured with 20-segment collect and place heads. If placement area 1 is equipped with 6-segment collect and place heads, then area 2 must also be configured with two 6-segment collect and place heads. The component range depends on the head configuration. The maximum component range is between 0.6mm x 0.3 mm (0201) to 27mm x 27mm. The max. height is 8.5mm. The placement station can be equipped with a single lane transport (item no: 119625) or alternatively with a flexible dual lane transport (item no: 119627). Information regarding the PCB size can be found under the respective item no. The transport must be configured during order. A moveable changeover table can be used at all 4 setup areas of one placement system. The changeover table enables fast setup changes. Each setup area should be equipped with a changeover table and the respective interface when ordering a placement station. The use of X-feeder changeover table is recommended as only these tables allow the use of intelligent X-Feeders. Changeover table SIPLACE X-Series (item no: 119722). Alternatively the changeover table of SIPLACE HF (item no: 119622) can be used. On these tables only SIPLACE S-feeders can be used. As the energy and data interface is different between the two feeder types also the respective interface should be ordered with the placement station. Interface X-changeover table (item no: 119723), for the setup areas to be equipped with X-changeover tables. Interface HF-changeover table (item no: 119724), for the setup areas to be equipped with HF-changeover tables. When using a 20 C+P head X-changeover tables and X-feeders have to be used. Tape disposal is made easy with the integrated automatic tape cutters. Placement station height configuration:830mm/900mm/930mm/950mm. The Windows XP based station computer with Touch-Screen monitor is the operators interface to the placement station. -Price upon inquiry-
A1D50119800-99 A1D50119800-99 Used: SMD placement station SIPLACE D1 for End-of-Line/High-End components with a maximum placement rate of 15,000 components per hour. For details see current valid Scope of Service and Delivery. The placement station provides a component feeding capacity of maximum 90 x 8mm tapes. The placement station can be configurated with one Pick and Place Head and alternative with a 12-Segment Collect and Place Head or a 6-Segment Collect and Place Head with integrated component vision. Additional to that, the SIPLACE D1 can be equipped only with one placement head: D1 (6), D1 (12), D1 (PP). Depending on the head configuration the placement station is capable to handle a component range from 0.6mm x 0.3mm (0201) or alternative 1.5mm x 0.8mm (0603) up to 85mm x 85mm as a standard. Optional 01005 Package (item-no.:119920). The placement station handles PCBs from size 50mm x 50mm (2 inch x 2 inch) up to 460mm x 508mm (18 inch x 20 inch) with single conveyor and up to 460mm x 242mm (18 inch x 9.5 inch) with dual conveyor. A component changeover table (item-no: 119822) on both sides must be configurated (exception: if WPC at location 1) and enables fast setup and changeovers. An additional Waffle Pack Changer (WPC) item-no:119825 could be configurated at location 1.Tape disposal is made easy with the integrated automatic tape cutters. The Windows based station computer with touch screen monitor is the powerfull operator interface to the placement system. -Price upon inquiry-
A1D50119821-99 A1D50119821-99 USED:Component feeder changeover table, height 830-950mm, with integrated reel container. For SIPLACE D4.Component feeder capacity (Typ S): 12 slots. With wheels for minimization of setup times.
A1D50119822-99 A1D50119822-99 USED:Component feeder changeover table, height 830-950mm, with integrated reel container. For SIPLACE D1/D2.Component feeder capacity (Typ S): 15 slots. With wheels for minimization of setup times.
A1D50119850-99 A1D50119850-99 Used: SMD placement station SIPLACE D2 with two gantries for high-speed applications with a maximum placement rate of 31,000 components per hour. For details see current valid Scope of Service and Delivery. The placement station provides a component feeder capacity of maximum 90 x 8mm tapes. Each of the two gantries of the placement station must be configurated with a 12-Segment Collect and Place Head or a 6-Segment Collect and Place Head, both with integrated component vision. In addition the heads can be exchanged later in the field. For this the order of the respective head Reconfiguration Kit is necessary. By order of the placement station an definition of the Collect and Place Heads configuration is required. A differentiation between the two gantries is necessary. Possible combination are:Gantry1/Gantry2 :12/12 or 6/12 or 6/6. Depending on the head configuration the machine is capable to handle a component range from 0.6mm x 0.3mm (0201) up to 18.7mm x 18.7mm at the 12-Segment Collect and Place Head or 1.5mm x 0.8mm (0603) up to 27mm x 27mm at the 6-Segment Collect and Place Head as a standard. Optional 01005 Package (item-no.:119920). The machine handles PCBs from size 50mm x 50mm [2 inch x 2 inch] up to 460mm x 508mm [18 inch x 20 inch] with single conveyor and up to 460mm x 242mm [18 inch x 9.5 inch] with dual conveyor. Optional the possible PCB length can be increased from 18 inch to 24 inch. A component changeover table (item-no.:119822) on the left and right hand side must be configurated and enables fast setup and changeovers. Tape disposal is made easy with the integrated automatic tape cutters. The Windows based station computer with touch screen monitor is the powerful operators interface to the placement system. -Price upon inquiry-
A1D50119870-99 A1D50119870-99 Used: Multifunctional SMD placement station with a maximum placement rate of 40,400 cph (in accordance with Scope of Service and Delivery) . The placement station provides a feeder capacity of maximum 180 x 8mm tapes. Depending on customer requirements, SIPLACE D3 can be equipped with 12-segment Collect und Place heads (item no: 119876) 6-segment Collect und Place heads (item no: 119875) or a twin head (item no: 119877), each head includes a component camera. The heads should be ordered separately with the placement station, one head must be ordered for each gantry of the placement station. The following head combinations are possible: Placement area 1: 12/12, 6/6, 12/6, 6/12, TH/TH, 6/TH, 12/TH. Placement area 2: 12, 6, TH. If placement area 1 is equipped with 6-segment collect und place heads then area 2 must be configured with a 6-segment collect und place head or a Twin Head. If placement area 1 is equipped with a TWIN Head, then area 2 must be configured with also a Twin Head. Depending on the head configuration the placement station is capable to handle a component range starting with 0.6mm x 0.3mm (0201) up to 125mm x 10mm. Max component height is 25mm. The placement station can be equipped with the modular single conveyor (Art-No:119930), or alternatively with a flexible dual lane conveyor (item no: 119932). Information regarding the PCB size can be found under the respective item no. The transport must be configured during order. A moveable changeover table (item no: 119622) can be used at all 4 setup areas of one placement station. The changeover table enables fast setup changes. Each setup area (exept configuration MTC2) had to be equipped with a changeover table und the respective interface (item no: 119724) when ordering the placement station. Tape disposal is made easy with the integrated automatic tape cutters. The Matrix Tray Changer MTC2 (Art-No:116438) is available as an option for location 2 and location 4. Placement station height configuration: 830mm/900mm/930mm/950mm. The Windows based station computer with Touch-Screen monitor is the operators interface to the placement station. -Price upon inquiry-
A1D50119880-99 A1D50119880-99 Used : Highspeed SMD placement station SIPLACE D4 with a maximum placement rate of 66,000 components per hour. For details see the current Scope of Service and Delivery. The placement station provides a feeder capacity of maximum 144 x 8mm tapes. The placement station has to be equipped with four 12-segment Collect und Place heads with integrated component vision system. The heads (item no: 119876) should be ordered separately with the placement station. SIPLACE D4 is capable to handle a component range starting with 0.6mm x 0.3mm up to 18.7mm x 18.7mm. Optional 01005 package (item-no.:119920). The placement station can be equipped with the modular single conveyor (item no:119940) or alternatively with a flexible dual lane conveyor (item no: 119942). Information regarding the PCB size can be found under the respective item no. The transport must be configured during order. Movable changeover tables enable fast setup changes. One changeover table (item no:119821) must be configured at all 4 setup areas of the placement system. Tape disposal is made easy with the four integrated automatic tape cutters. Placement station height configuration: 830mm/900mm/930mm/950mm. The Windows based station computer with Touch-Screen monitor is the operators interface to the placement station. -Price upon inquiry-
A1D50140000-99 A1D50140000-99 USED: Placement station complete SIPLACE CF consist of the flexible placement station SIPLACE CF, nozzle changer for Collect and Place Head, nozzle changer for Pick and Place Head, SMEMA-Interface, changeover table and feeder package The placement station SIPLACE CF has a maximum placement rate of 9,000 components per hour. For details see current valid Scope of Service and Delivery. The station provides a component capacity of maximum 118 x 8mm tapes. The machine is equipped with one Pick and Place Head and 6-Segment Collect and Place Head with integrated component vision. The machine is capable to handle a component range from 0.6mm x 0.3mm (0201) up to 55mm x 55mm as a standard. Larger components are possible on request. The machine handles PCBs from size 50mm x 50mm (2 inch x 2 inch) up to 508mm x 460mm (20 inch x 18 inch). The station is equipped with two changeover tables for fast set-up and changeovers. Tape disposal is made easy with the integrated automatic tape cutters. Included in the package is a nozzle changer for the 6-Segment Collect and Place Head with 5 magazines and a nozzle magazine for the Pick and Place Head, for a maximum of 5 nozzles. Also included is a configurable feeder package. For this a point system is available. Each feeder available for the SIPLACE CF has a certain amount of points. A maximum of 35 points per machine can be assigned. The Windows XP based station computer with flat-screen and keyboard is the powerful operators interface to the placement system. -Price upon inquiry- ********** ****************************************************** Performance/Acceptance package for overhauling machines: Check of mechanical componentes Check of wiring and cables Replacement of all defective parts and components Overhaul of placement heads Full commissioning 12 hours continuous operation without placement PCB mapping Trial placement on test PCB VDE testing Maschine capability test (MCT) Production run Full safety check Documentation of all testing steps System acceptance test according chapter 6 scope of service and delivery Siplace Placement systems