Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
A1D50118020-99

A1D50118020-99

Manufacturer: SIEMENS

Price: On Request

USED Package for optimised placement of 0201 components (size 0.6 x 0.3mm) regarding dpm rate and pick up rate. Suitable for all SIPLACE S-27 HM, HS-xx and HF-Series. The Package includes: High resolution DCA-camera, 24 x Nozzle type 906 oval tip, 0201 Handbook. The component spectrum forthe DCA-Camera is 0201 up to 13mm x 13mm. When using the nozzle type 906the use of the component sensor is mandatory (item number: 118021). The component sensor can only be used at a 12-Segment Collect and Place Headand requires the modular head board. One 0201 Package and one component sensor per Head is required. In addition the special 3x8mm 0201 feeder module is necessary for any 0201 placement (item number: 141099). Systemrequirement: Station computer >= 503.01 .Line computer >= 503.01 or SIPLACE PRO 1.3.

Similar items in same category:
A1D50117004-99 A1D50117004-99 USED: SMD Placement Station SIPLACE F4. Attention: Machine has been rebuilt from S-20 to F4. There are no technical restriction refering quality and utility. In case of spare part order, there has to be an remark of rebuilt. 12-Segment Collect and Place Head, Benchmark placement rate: 10.000 cp/hr component feeder capacity: 2x40 8mm tapes, placement heads: 1 Pick and Place Head with component vision system and 1 12-Segment Collect and Place Head with optical component recognition system, Component size: 0402 to 55x55mm, PCBoard size: 50x50mm to 460x460mm, Including: 1 component changeover table on lefthand side, 2 automatic tape cutters, station computer. -Price upon inquiry- Performance/Acceptance package for overhauling machines: Check of mechanical componentes Check of wiring and cables Replacement of all defective parts and components Overhaul of placement heads Full commissioning 12 hours continuous operation without placement PCB mapping Trial placement on test PCB VDE testing Maschine capability test (MCT) Production run Full safety check Documentation of all testing steps System acceptance test according chapter 6 scope of service and delivery Siplace Placement systems
A1D50117250-99 A1D50117250-99 USED: SMD Placement Station SIPLACE F5. Maximum placement rate 8,000 comp./h. Component feeder capacity: 2 x 40 8 mm tapes. 1 x 6-Segment Collect and Place Head with component vision. Component range from 0603 to 32 mm x 32 mm. 1 x Pick and Place Head with component vision. Component range up to 55 mm x 55 mm. Accessories: 1 component feeder changeover table - lefthand side, 2 tape cutters, station computer with monitor. -Price upon inquiry- Performance/Acceptance package for overhauling machines: Check of mechanical componentes Check of wiring and cables Replacement of all defective parts and components Overhaul of placement heads Full commissioning 12 hours continuous operation without placement PCB mapping Trial placement on test PCB VDE testing Maschine capability test (MCT) Production run Full safety check Documentation of all testing steps System acceptance test according chapter 6 scope of service and delivery Siplace Placement systems
A1D50117500-99 A1D50117500-99 USED: SMD Placement Station SIPLACE F5 HM. SMD placement station for End-of-Line/High-End components with a maximum placement rate of 11, 000 components per hour. For details see current valid Scope of Service and Delivery. The station provides a component capacity of maximum 118 x 8mm tapes. The machine is equipped with one Pick and Place Head and alternative with a 12 -Segment Collect and Place Head or a 6-Segment Collect and Place Head with integrated component vision. By order of machine an additional definition of the Collect and Place Head configuration is required: 12-Segment Collect and Place Head, item no. 118016, 6-Segment Collect and Place Head, item no. 118015. Depending on the head configuration the machine is capable to handle a component range from 0.6mm x 0.3mm (0201) or alternative 1.5mm x 0.8mm (0603) up to 55mm x 55mm as a standard. Larger components are possible on request. The machine handles PCBs from size 50mm x 50mm (2 x 2 inch) up to 508mm x 460mm (20 x 18 inch) with single conveyor and up to 508mm x 216mm (20 x 8.5 inch) with dual conveyor. A component changeover table on the left hand side enables fast set-up and change overs. Additional component changeover table (item number 117228) or Waffle-Pack Changer on the right side is required. Tape disposal is made easy with the integrated automatic tape cutters. The Windows/NT based station computer with touch screen monitor is the powerfull operators interface to the placement system. -Price upon inquiry- ************************************************ **************** Performance/Acceptance package for overhauling machines: Check of mechanical componentes Check of wiring and cables Replacement of all defective parts and components Overhaul of placement heads Full commissioning 12 hours continuous operation without placement PCB mapping Trial placement on test PCB VDE testing Maschine capability test (MCT) Production run Full safety check Documentation of all testing steps System acceptance test according chapter 6 scope of service and delivery Siplace Placement systems
A1D50118000-99 A1D50118000-99 USED: Placement Machine SIPLACE S-25 HM. Upgrade from S-23 HM, including 2 component change-over tables mobile. Matrix Tray Changer - able after using upgrate package 00356653-01 and the requested nozzle changers. If additional MTC, there will be lost 3 parking places because of the drop tank. Machine holders are without windows for MTC. SMD placement machine with two gantries for high-speed applications with a maximum placement rate of 25.000 components per hour. For details see current valid Scope of Service and Delivery. The station provides a component feeder capacity of maximum 118 x 8mm tapes. -Price upon inquiry- Performance/Acceptance package for overhauling machines: Check of mechanical componentes Check of wiring and cables Replacement of all defective parts and components Overhaul of placement heads Full commissioning 12 hours continuous operation without placement PCB mapping Trial placement on test PCB VDE testing Maschine capability test (MCT) Production run Full safety check Documentation of all testing steps System acceptance test according chapter 6 scope of service and delivery Siplace Placement systems
A1D50118250-99 A1D50118250-99 USED: Placement Machine SIPLACE S-25 HM. Matrix Tray Changer competent. SMD placement machine with two gantries for high-speed applications with a maximum placement rate of 25.000 components per hour. For details see current valid Scope of Service and Delivery. The station provides a component feeder capacity of maximum 118 x 8mm tapes. A Matrix Tray Changer suitable for both sides of the machine is available. The MTC can be equipped with up to 80 trays. The trays can be refilled while the machine is running.One changeover table or MTC for each side is mandatory. -Price upon inquiry- Performance/Acceptance package for overhauling machines: Check of mechanical componentes Check of wiring and cables Replacement of all defective parts and components Overhaul of placement heads Full commissioning 12 hours continuous operation without placement PCB mapping Trial placement on test PCB VDE testing Maschine capability test (MCT) Production run Full safety check Documentation of all testing steps System acceptance test according chapter 6 scope of service and delivery Siplace Placement systems
A1D50118500-99 A1D50118500-99 USED: SMD placement machine with two gantries for high-speed applications with a maximum placement rate of 26,500 components per hour. For details see current valid Scope of Service and Delivery. The station provides a component feeder capacity of maximum 118 x 8mm tapes. Each of the two gantries of the machine can be equipped with a 12-Segment Collect and Place Head or a 6-Segment Collect and Place Head both with integrated component vision. In addition the heads can be exchanged later in the field. For this the order of the respective Head Re-Configuration Kit is necessary. By order of the machine an additional definition of the Collect and Place Head configuration is required. A differentiation between the two gantries is necessary. Possible combination are: Gantry1 / Gantry 2 12/12, 6/12 or 6/6. Each head can optional be equipped with a high resolution camera. Item number for Collect and Place Heads on gantry 1: 6-Segment Collect and Place Head, item number 118515, 12-Segment Collect and Place Head, item number 118516. Gantry 2: 6-Segment Collect and Place Head, item number 118517, 12-Segment Collect and Place Head, item number 118518. Depending on the head configuration the machine is capable to handle a component range from 0.6mm x 0.3mm (0201) up to 18.7 x 18.7mm at the 12-Segment Collect and Place Head or 1.5mm x 0.8mm (0603) up to 32mm x 32mm at the 6-Segment Collect and Place Head as a standard. Larger components are possible on request. The machine handles PCBs from size 50 x 50mm [2 inch x 2 inch] up to 508mm x 460mm [20 inch x 18 inch] with single conveyor and up to 508mm x 216.5mm [20 inch x 8.5 inch] with dual conveyor. Optional the possible PCB length can be increased from 20 inch to 24 inch. A component changeover table on the left and right hand side enables fast set-up and changeovers. Tape disposal is made easy with the integrated automatic tape cutters. Optional a Matrix Tray Changer suitable for both sides of the machine is available. The MTC can be equipped with up to 80 trays. The trays can be refilled while the machine is running. One changeover table or MTC for each side is mandatory. Changeover table, item No. 117228. MTC, item No. 116436. The Windows/NT based station computer with touch screen monitor is the powerful operators interface to the placement system. -Price upon inquiry- Performance/Acceptance package for overhauling machines: Check of mechanical componentes Check of wiring and cables Replacement of all defective parts and components Overhaul of placement heads Full commissioning 12 hours continuous operation without placement PCB mapping Trial placement on test PCB VDE testing Maschine capability test (MCT) Production run Full safety check Documentation of all testing steps System acceptance test according chapter 6 scope of service and delivery Siplace Placement systems ************************************************************ ****
A1D50119000-99 A1D50119000-99 USED: SMD Placement Station SIPLACE HS-50. Maximum placement rate 50.000 comp./hour. Component feeder capacity: 144 x 8 mm tapes. 4 x 12-Segment Collect and Place Heads with component vision. Component range from 0402 to 18,7 mm x 18,7 mm. PCB-size: 50 mm x 50 mm to 368 mm x 460 mm. Accessories: 1 component feeder changeover table per Collect and Place Head, 4 tape cutters, station computer with 2 flat screen monitors and keyboards. -Price upon inquiry- Performance/Acceptance package for overhauling machines: Check of mechanical componentes Check of wiring and cables Replacement of all defective parts and components Overhaul of placement heads Full commissioning 12 hours continuous operation without placement PCB mapping Trial placement on test PCB VDE testing Maschine capability test (MCT) Production run Full safety check Documentation of all testing steps System acceptance test according chapter 6 scope of service and delivery Siplace Placement systems
A1D50119022-99 A1D50119022-99 USED Component feeder changeover table for SIPLACE HS-50 and HS-60.Conveyor height 830-950mm. With integrated lifting device and integrated reel container for both sides of the machine, for minimization of setup times. Component feeder capacity: 36 x 8mm tapes.