Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
A1D00119719
Manufacturer: SIEMENS
Price: On Request
Measurement device for inspection of the co-planarity for leaded components, when having gullwings. For use with Twin Head in SIPLACE X2/X3/D3. Only in the second placement area.
Similar items in same category:
A1D00119715 | Nozzle Changer for 20-Segment Collect and Place Head SIPLACE X-Series. For each Collect and Place Head one Nozzle Changer is required. The option contains 6 magazines each 12 nozzles. The nozzle reject device is part of the standard configuration with 20 Nozzle C+P head. This item number is for initial equipment. If an additional nozzle changers are required the item no. 119716 (nozzle changer add. X-Serie/C+P20) must be ordered. | |
A1D00119716 | Additional Nozzle Changer for 20-Segment Collect and Place Head SIPLACE X-Series. It is possible to place maximal two nozzle changers for each Collect and Place Head. The option contain 6 magazines for 12 nozzles per magazine include material. For initial equipment the nozzle changer SIPLACE X-Series/C+P20 (Item No.: 119715) must be ordered. | |
A1D00119717 | Second nozzle changer for TwinHead at SIPLACE HF-Series, X-Series and D3 from SW 602, Siplace Pro 3.1. Machine can be equipped with max. two nozzle changers per placement area (the first nozzle changer belongs to the standard configuration of HF,HF/3,X-Series,D3). The second nozzle changer can be mounted at setup location 2 and 4. These additional nozzle changer is not possible together with MTC2. The nozzle changer can only provided with up to 12 nozzle magazines. Two different magazine types are available: standard magazines (03005191-02) and magazines for special nozzles / grippers (03001807-01). The option already contains three standard magazines and one special magazine. Preconditions:Line software Siplace Pro 2.1 or higher, Station software 505.03 or higher. | |
A1D00119718 | Additional high resolution, stationary component camera digital in X-Series,D1,D3 machines for centering of FlipChips. With this head a component range from 0.2mm x 0.2mm up to 16mm x 16mm can be placed. The smallest bump diameter is 80um, the min. Lead / Bump pitch 250um / 140um. | |
A1D00119720 | Package for placement of 0201 components (size 0.6mm x 0.3mm). Suitable for SIPLACE X/D-Series equipped with the 12-Segment Collect and Place head. The Package includes: High resolution camera (Exchange between standard digital component camera. The standard digital component camera is then not part of delivery), 24 x Nozzle type 906 oval tip,Component Sensor, Reconfiguration Instructions for 0201 placement. A 0201 Paket is essential for each placement head. In addition for the D-Series (and X-Series equipped with S-Feeders) the special 3x8mm 0201 feeder module is necessary for any 0201 placement (item number: 141099).This item number can only ordered in combination with SIPLACE X/D-Series. It cannot be ordered seperately. | |
A1D00119720S01 | 0201 Package for 12 C+P, X / D-Series | |
A1D00119721 | The Twin Head Re-Configuration Kit is necessary to exchange the actual Placement Head of the SIPLACE X-Series/D3 (119700 / 119750 / 119780 / 119870) Placement Machine with Head Modularity, in a Twin Head. The Kit includes: 2 Pick and Place Modules, Stationer Component-Camera (Digital), a nozzle changer with 3 Dual Garage Magazine and 1 Single Garage Magazine, Cover, Head Servo Cards, Head Adapter board, Vision Controller, Cables, additional parts, Tools for Head exchange, Box for replaced Head and a Technical Manual. With this kit the Head Exchange can be performed by trained service personnel at customer side within 8 hours. If required the automatic nozzle changer for the 6 nozzle head has to be ordered separately. The customer service is not included in this price. | |
A1D00119722 | Component feeder changeover table with 40 X-Feeder slots for SIPLACE X-Series machines, 830mm-950mm with integrated reel container and wheels for minimization of setup times. |