Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
A1D00116933
Manufacturer: SIEMENS
Price: On Request
Docking station for provision of an infrastructure for communication between the PC of the Setup Center and the X-Feeder modules. Stand alone operation allows the X-Feeders to be supplied with power. Can be set to the SMEMA heights 830/ 900/ 930/ 950 mm. Line voltage: 88-264V. Compressed air pressure: 5-10 bar.
Similar items in same category:
A1D00116924 | This WLAN ACCEss Point (Hardware) is needed for the wireless communication between Setup Center PC and one or more Pocket PC Scanner. NOTE: The number of WLAN ACCEss POINTs has to be determined in a factory prior to the install. | |
A1D00116926 | This software must be installed on the SIPLACE station to enable the station to communicate with the Setup Center Basic Package. This is required for each C/S/F/HS/HF/Xx/D-Series station that will be connect to the Setup Center Basic Package. | |
A1D00116927 | The WLAN CLIENT MODULE (Hardware) is needed for the communicaton between the SIPLACE LAN and the wireless (WLAN) Scanner Network. NOTE: The number of WLAN CLIENT MODULES has to be determined in a factory prior to the install. | |
A1D00116931 | This option for the X-Series contains a CANBus-Card with CANBus-cables and is required for communication between Ess-PC (116366 SIPLACE Pro desktop hardware + OS) and Ess-Docking Station. Ess-Docking Station for Changeover table X-Series (116933).Ess (Externe setup station).Ess-PC and Ess-Docking Station has to be ordered separately. | |
A1D00116933S03 | ESS Docking Unit for COTF-X (HW) | |
A1D00116935 | SIPLACE Splice Detection Hub for Table Controller: This item is needed t o prepare a SIPLACE station for splice detection. It contains a hub for connection of up to 2 table controllers for SIPLACE S/F. Also, cabling a nd mounting material is included. Additionally, the respective table con troller(s) and splice sensors need to be ordered. | |
A1D00116935-01 | SIPLACE Splice Detection Hub for Table Controller: This item is needed to prepare a SIPLACE station for splice detection. It contains a hub for connection of up to 2 table controllers for SIPLACE S/F. Also, cabling and mounting material is included. Additionally, the respective table controller(s) and splice sensors need to be ordered. | |
A1D00116936 | SIPLACE Splice Detection Hub for Table Controller: This item is needed t o prepare a SIPLACE station for splice detection. It contains a hub for connection of up to 4 table controllers for SIPLACE HS-xx. Also, cabling and mounting material is included. Additionally, the respective table c ontroller(s) and splice sensors need to be ordered. |