Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
2LP1170-0AK61-2CD5
Manufacturer: SIEMENS
Price: On Request
FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 3.478; Geometry slow-moving shaft: W75x2x36x9e DIN 5480;
Similar items in same category:
2LP1170-0AA01-1HL3 | FLENDER Helical gear units for high thrust forces; Type: 073F, Size: 6100; Rated torque for each rotating shaft: 6,100 Nm; Centre distance between slow-moving shafts: 72.5 mm; Actual ratio: 4.05; Geometry slow-moving shaft: W60x2x28x9e DIN 5480; | |
2LP1170-0AK60-0TS2 | FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 1.806; Geometry slow-moving shaft: W75x2x36x9e DIN 5480; | |
2LP1170-0AK60-4EV6 | FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 2.48; Geometry slow-moving shaft: W75x2x36x9e DIN 5480; | |
2LP1170-0AK60-7RA1 | FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 3.08; Geometry slow-moving shaft: W75x2x36x9e DIN 5480; | |
2LP1170-0AK61-5NH0 | FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 4.947; Geometry slow-moving shaft: W75x2x36x9e DIN 5480; | |
2LP1170-0AV30-1NK4 | FLENDER Helical gear units for high thrust forces; Type: 112F, Size: 21500; Rated torque for each rotating shaft: 21,500 Nm; Centre distance between slow-moving shafts: 112 mm; Actual ratio: 2.458; Geometry slow-moving shaft: W90x2.5x34x9e DIN 5480; | |
2LP1170-0AV30-4YN8 | FLENDER Helical gear units for high thrust forces; Type: 112F, Size: 21500; Rated torque for each rotating shaft: 21,500 Nm; Centre distance between slow-moving shafts: 112 mm; Actual ratio: 3.167; Geometry slow-moving shaft: W90x2.5x34x9e DIN 5480; | |
2LP1170-0AV30-8KS3 | FLENDER Helical gear units for high thrust forces; Type: 112F, Size: 21500; Rated torque for each rotating shaft: 21,500 Nm; Centre distance between slow-moving shafts: 112 mm; Actual ratio: 4.471; Geometry slow-moving shaft: W90x2.5x34x9e DIN 5480; |