Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
A1D00119928

A1D00119928

Manufacturer: SIEMENS

Price: On Request

For SIPLACE X4i/X4/X3/X2. Configuration of the conveyor rails to a distance of 267.5mm from the centre, the distance between the two fixed rails is 535mm. Both fixed rails are in the outer position, which means one rail is fixed left side the other rail fixed right side. The two moving lanes are in the middle. It must be ensured, that this extended dimension will be supported from all machines in the line or respective shuttles are available. The maximum PCB width is 250mm in dual lane mode.

Similar items in same category:
A1D00119920 A1D00119920 Package for placement of 01005 components (size 0.4mm x 0.2mm). Suitable for the SIPLACE D4/D2/D1 equipped with the 12 Collect & Place Head (DLM3). The component range will be from 01005 up to the maximum of 16mm x 16mm. The package includes: 1 x High resolution camera Type 38 (exchange between standard component camera. The standard component camera is then not part of delivery), 12 x Nozzle 905, 3 x Low Force Sleeves, 1 x Assembly instruction. Also included are shims for the component tables of the SIPLACE D4. In addition the Tape feeder module 3x8mm 01005 Comp. (Item number:176100) is necessary for 01005 feeding and has to be ordered separately. Additional Low Force Sleeves could also be ordered (Item number: 03054107-xx). For additional 0201 placement, a component sensor (item number: 118021) is mandatory. The price for this 01005 package is only valid in combination with a new D-Series Machine (D4/D2/D1). System requirement: Station Software from 604 and SIPLACE Pro from Version 5.0.
A1D00119920S01 A1D00119920S01 01005 package for D1/D2/D4
A1D00119921 A1D00119921 SIPLACE Setup Center Basic Package. This software package for Basic Set up Verification is required one time per factory for SIPLACE C/S/F,HS-xx ,HFx,Xx. The following software components are included:Basic Software P ackage (1 pcs), Setup Control Database (MSDE) (1 pcs).
A1D00119926 A1D00119926 For SIPLACE X4i/X4/X3/X2.Configuration of the conveyor rails to a distance of 254mm from the centre, the distance between the two fixed rails is 508mm. Both fixed rails are in the outer position, which means one rail is fixed left side the other rail fixed right side. The two moving lanes are in the middle. It must be ensured, that this extended dimension will be supported from all machines in the line or respective shuttles are available. The maximum PCB width is 236.5mm in dual lane mode.
A1D00119933-01 A1D00119933-01 The Feeder Protection consists of a cover over the feed area. If a fee der is pressed up or if feeder flaps are projecting upwards, the EMERG ENCY OFF is actuated. The option contains one protection plate, which can be installed in location 1 or 3. Only for changeover table HF/D3 ( 119622).
A1D00119940 A1D00119940 Modular single conveyor D4 with fixed rail right/left (choose in configuration 119626/119628) for placement station D4. Article has to be configurated with the order of placement station D4. With this new transport the PCB is clamped to top side, that means the placement level is always on the same height, independent from PCB-Thickness. The new transport offers short PCB change time and the possibility to change easily the fixed rail Right <-> Left. PCB-dimensions: L x W, Standard: 50mm x 50mm to 368mm x 460mm. Extended dimensions with the Long Board Option (119427): 50mm x 110mm to 610mm x 460mm.
A1D00119942 A1D00119942 Modular dual conveyor D4 with fixed rail right/left (choose in configuration 119626/119628) for placement station D4. Article has to be configurated with the order of placement station D4. With this new transport the PCB is clamped to top side, that means the placement level is always on the same height, independent from PCB-Thickness. The new transport offers short PCB change time and the possibility to change easily the fixed rail Right <-> Left. PCB-dimensions: L x W, Standard: 50mm x 50mm to 368mm x 216mm, Extended dimensions with the Long Board Option (119427/119428): 50mm x 110mm to 610mm x 216mm. For the dual conveyor a additional HW Stopper unit, Long Board Option D4 (119428) is required.
A1D00119967 A1D00119967 In SIPLACE X4i feeder capacity is reduced compared to the other SIPLACE X-Series machines by 6 feeder slots in setup are 2 and 4. This item number avoids the setup of feeders in this area. In addition one of the two COT fiducials is attached to fillingpart. As this fiducial must always be available, so the fillingpart is mandatory on setup area 2 and 4 for SIPLACE X4I. In the delivery of SIPLACE X4i two fillingparts are included. This item number needs to be ordered when additional changeover tables are used in production for setup change.