Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
A1D00119872

A1D00119872

Manufacturer: SIEMENS

Price: On Request

Additional mechanical stopper for Long Boards at SIPLACE D1/D2 single conveyor. With this additional stopper the transport can handle PCBs up to 610mm x 460mm (together with wide board configuration up to 610mm x 508mm) in the single conveyor mode.

Similar items in same category:
A1D00119864 A1D00119864 The Adapter Kit SIPLACE D1 C&P 12 Head is necessary to upgrade a Siplace D1 machine with only a Pick & Place Head to a SIPLACE D1 with an additional 12 Segment Collect & Place Head. After the upgrade a wider component range could be achieved and due to the Collect & Place principle also a higher placement rate with smaller components. For more details regarding higher performance and wider component range, please see the specification of the SIPLACE D1. This adapter kit includes the 12 Segment Collect & Place Head, 12 Sleeves, Standard Component Camera (Type 28), Servo cards, electrical and pneumatic connections, small parts and a technical manual. If required, the automatic nozzle changer for the 12 Segment Collect & Place head has to be ordered separately (Item No. 119865). The retrofit time for the machine of the hardware parts will be approx. 4 hours (excluding additional effort on programming in SIPLACE Pro).
A1D00119865 A1D00119865 Nozzle Changer for 12-Segment Collect and Place Head SIPLACE D1/D2. For each Collect and Place Head one Nozzle Changer has to be ordered. The option contains 6 magazines for 12 nozzles include nozzle reject device.
A1D00119866 A1D00119866 Nozzle Changer for 6-Segment Collect and Place Head SIPLACE D1/D2. For each Collect and Place Head one Nozzle Changer has to be ordered. The option contains 3 magazines for 6 nozzles type 9xx and 1 magazine of nozzles type 8xx, including nozzle reject device.
A1D00119870 A1D00119870 Multifunctional SMD placement station with a maximum placement rate of 40,400 cph (in accordance with Scope of Service and Delivery). The placement station provides a feeder capacity of maximum 180 x 8mm tapes. Depending on customer requirements, SIPLACE D3 can be equipped with 12-segment Collect und Place heads (item no: 119876) 6-segment Collect und Place heads (item no: 119875) or a twin head (item no: 119877), each head includes a component camera. The heads should be ordered separately with the placement station, one head must be ordered for each gantry of the placement station. The following head combinations are possible: Placement area 1: 12/12, 6/6, 12/6, 6/12, TH/TH, 6/TH, 12/TH. Placement area 2: 12, 6, TH. If placement area 1 is equipped with 6-segment collect und place heads then area 2 must be configured with a 6-segment collect und place head or a Twin Head. If placement area 1 is equipped with a TWIN Head, then area 2 must be configured with also a Twin Head. Depending on the head configuration the placement station is capable to handle a component range starting with 0.6mm x 0.3mm (0201) up to 125mm x 10mm. (For 0201 placement, there is an optional package necessary). Max component height is 25mm. The placement station can be equipped with the modular single conveyor (Art-No:119625), or alternatively with a flexible dual lane conveyor (item no: 119627). Information regarding the PCB size can be found under the respective item no. The transport must be configured during order. A moveable changeover table (item no: 119622) can be used at all 4 setup areas of one placement station. The changeover table enables fast setup changes. Each setup area (exept configuration MTC2) had to be equipped with a changeover table und the respective interface (item no: 119724) when ordering the placement station. Tape disposal is made easy with the integrated automatic tape cutters. The Matrix Tray Changer MTC2 (Art-No:116438) is available as an option for location 2 and location 4. In addition the Waffel Pack Changer, WPC (item no. 119825) in placement area 2 is available. Next to the WPC, 5 setup locations for SIPLACE S-Feeder are available. The WPC can only be used on setup location 2. Placement station height configuration: 830mm/900mm/930mm/950mm. The Windows based station computer with Touch-Screen monitor is the operators interface to the placement station. Four days of basic instruction and pre acceptance at supplier site per line are included in the placement station order.
A1D00119873 A1D00119873 Additional mechanical stopper for Long Boards at SIPLACE D1/D2 in dual conveyor mode. With the long board option the dual conveyor can handle PCBs up to 610mm x 216mm (together with the wideboard configuration up to 610mm x 242mm and with the flexible dual conveyor in single mode up to 610mm x 380mm).
A1D00119875 A1D00119875 6-Segment Collect and Place Head for SIPLACE D-Series placement stations. The head can be used on D1/D2/D3 placement stations of the D-Series, the respective component camera is included. The component range is from 0.6mm x 0.3mm (0201) up to 27mm x 27mm sized components, with a maximum height of 8.5 mm and a weight of 5g.. For more details refer to the specification and the valid scope of delivery. For easy exchange of nozzle the use of a nozzle changer is recommended. The nozzle changer is optionally available. This item number is for configuration purpose only. This item number can only be ordered in combination with SIPLACE D-Series placement stations. It cannot be ordered separately.
A1D00119876 A1D00119876 12-Segment Collect and Place Head for SIPLACE D-Series placement stations. The head can be used on all placement stations of the D-Series, the respective component camera is included. The component range is from 1mm x 0.5mm (0402) up to 18.7mm x 18.7mm sized components, with a maximum height of 6mm and a max weight of 2g.. For more details refer to the specification and the valid scope of delivery. For easy exchange of nozzle the use of a nozzle changer is recommended. The nozzle changer is optionally available. In addition a high resolution camera, improving the component range (0.6mm x 0.3mm / 18.7mm x 18.7mm), is available. More information can be found under the respective item number (item no: 119779). This item number is for configuration purpose only. This item can only be ordered in combination with SIPLACE D-Series placement stations. It cannot be ordered separately.
A1D00119877 A1D00119877 SIPLACE D3 Twin Head for SIPLACE D3 placement station.The D3 Twin Head consists of two autonomous working pick and place modules. Included in delivery are a stationary component camera and 1 Nozzle changer with 3 standard nozzle magazines (item no: 03005191) for each 2 nozzles and 1 Soko nozzle magazine (item no: 03001807). With this head a component range from 1.5mm x 0.8mm (0603) up to 55mm x 45mm or up to 69mm x 10mm to 85mm x 85mm (Single Nozzle Operation) can be placed. Larger Components on request. Max. component height 25mm. Max weight (component + nozzle/gripper): 30g.(Standard), 100g. (with reduced speed). Programmable placement force: 1N-15N. For more details refer to the specification and the valid scope of delivery. In addition a stationary high resolution camera, increasing the component range, is available. The camera enables the recognition of a component size between 0.2mm x 0.2mm / 16mm x 16mm. More information can be found under the respective item number (item no: 119718).