Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
A1D00119857

A1D00119857

Manufacturer: SIEMENS

Price: On Request

Additional mechanical PCB alignment for D1/D2 single conveyor: with this option PCBs with a length/width ratio bigger 2/1 can be transported with the small side at the single conveyor belts into the placement area. This option is only available for single conveyor.

Similar items in same category:
A1D00119846 A1D00119846 Adapter for feeder changeover table (119822) SIPLACE D1/D2, for the Reel Holder (141204),for the Tape Feeder Module 3x8mm (141098/141099/141088).The Adapter connect the feeder changover table with the Reel Holder.
A1D00119850 A1D00119850 SMD placement station SIPLACE D2 with two gantries for high-speed applications with a maximum placement rate of 31,000 components per hour. For details see current valid Scope of Service and Delivery. The placement station provides a component feeder capacity of maximum 90 x 8mm tapes. Each of the two gantries of the placement station must be configured with a 12-Segment Collect and Place Head or a 6-Segment Collect and Place Head, both with integrated component vision. In addition the heads can be exchanged later in the field. For this the order of the respective head Reconfiguration Kit is necessary. By order of the placement station an definition of the Collect and Place Heads configuration is required. A differentiation between the two gantries is necessary. Possible combination are: Gantry1/Gantry2 :12/12 or 6/12 or 6/6. Depending on the head configuration the machine is capable to handle a component range from 0.4mm x 0.2mm (01005) up to 27mm x 27mm. (For 0201 and 01005 placement, there are optional packages necessary). The machine handles PCBs from size 50mm x 50mm (2 inch x 2 inch) up to 460mm x 508mm (18 inch x 20 inch) with single conveyor and up to 460mm x 242mm (18 inch x 9.5 inch) with dual conveyor. Optional the possible PCB length can be increased from 18 inch to 24 inch. A component changeover table (item-no.:119822) on the left and right hand side must be configured and enables fast setup and changeovers. Tape disposal is made easy with the integrated automatic tape cutters. The Windows based station computer with touch screen monitor is the powerful operators interface to the placement system. Four days of basic instruction and pre acceptance at supplier site per line are included in the placement station order.
A1D00119854 A1D00119854 The Feeder Protection consists of a cover over the feed area. If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate for the feeder area (location) 1 of the SIPLACE D2.
A1D00119856 A1D00119856 The Feeder Protection consists of a cover over the feed area. If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate for the feeder area (location) 2 of the SIPLACE D2.
A1D00119858 A1D00119858 Additional mechanical PCB alignment for D1/D2 dual conveyor: with this option PCBs with a length/width ratio bigger 2/1 can be transported with the small side at the dual conveyor belts into the placement area. This option is only available for dual conveyor.
A1D00119860 A1D00119860 The Reconfigurationkit C&P is neccessary to exchange the 6-Segment Collect and Place Head of the D1/D2 with a 12-Segment Collect and Place Head. The Kit includes: 12-Segment Collect and place Head, Component camera, Set Sleeves, Cover, Tools for Head exchange, Box for replaced Head, Nozzles (Type 904) and a technical manual for the head exchange. With this kit the Head exchange can be performed by trained Service personal at customer side within 8 hours. If required, the automatic nozzle changer for the 12-Segment Collect and place head has to be ordered seperatly.
A1D00119861 A1D00119861 The Reconfigurationkit C&P is neccessary to exchange the 12-Segment Collect and Place Head of the D1/D2 with a 6-Segment Collect and Place Head. The Kit includes: 6-Segment Collect and place Head, Component camera, Set Sleeves, Cover, Tools for Head exchange, Box for replaced Head, Nozzles (Type 904) and a technical manual for the head exchange. With this kit the Head exchange can be performed by trained Service personal at customer side within 8 hours. If required, the automatic nozzle changer for the 6-Segment Collect and place head has to be ordered seperatly.
A1D00119862 A1D00119862 The Adapter Kit SIPLACE D1 P&P Head is necessary to upgrade a Siplace D1 machine with only a Collect & Place Head to a SIPLACE D1 with an additional P&P Head. After the upgrade a wider component range could be achieved, in detail for larger and higher components. For more details regarding wider component range and other technical points, please see the actual specification of the SIPLACE D1. This adapter kit includes the Pick and Place Module, Nozzle changer P&P which includes 2 dual magazines for standard nozzles and 1 magazine for special nozzles, stationary Component Camera (Type 36), Servo cards, electrical and pneumatic connections, small parts and a technical manual. The retrofit time for the machine of the hardware parts will be approx. 4 hours (excluding additional effort on programming in SIPLACE Pro).