Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
A1D00119610
Manufacturer: SIEMENS
Price: On Request
The Feeder Protection consists of a cover over the feed area (119622, 119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location 2 or 4. Only for changeover table HF/D3.
Similar items in same category:
A1D00119475 | PCB vision module Multicolor for placement stations HS60 and HS50 with i ntegrated oblique IR-and blue illumination.Compact unit.For best recogni tion of bare PCB fiducials on bright PCB basis material (ceramic substra tes, CEM etc.), Flex Boards and fluctuations of PCB surfaces. Comfortabl e handling and adjustment. Item number only for new machines, for retrof it part number 358031. | |
A1D00119600 | SMD placement station for End-of-Line/High-End components with a maximum placement rate of 17,000 cph (in accordance with Scope of Service and D elivery). The placement station provides a feeder capacity of maximum 18 0 x 8mm tapes. The placement station is equipped with a 12-Segment Colle ct and Place Head respectively a 6-Segment Collect and Place Head or a T win Head. The following head configurations are included as standard sco pe of delivery: Gantry 1: Twin Head (item no. 119620) Gantry 3: Twin Hea d (item no. 119620). By ordering an HF placement station an additional d efinition of the placement head configuration in placement area 1 and 2 (ex SW 505)is required: 12-Segment Collect and Place Head (item no. 1196 16), 6-Segment Collect and Place Head (item no. 119615), Twin Head (ite m no. 119620). In placement area 2 only the Twin Head (pre SW 505)will b e available. Depending on the head configuration the placement station i s capable to handle a component range starting with 0.6mm x 0.3mm (0201) or alternatively 1.5mm x 0.8mm (0603) up to 50mm x 50mm (dual nozzle op eration) or 125mm x 10mm (single nozzle operation). Max. component heigh t is 25mm. Larger components are possible (on request). For 0201 placeme nt we recommend the 0201 Package Phase 2 (item no. 118020). Regarding PC B conveyor please have a look at: Item no. 119625 modular single conveyo r II 2380mm or Item no. 119627 modular dual conveyor II 2380mm. At all locations the changeover table is configured as a standard and enables a fast setup and changeovers. The Matrix Tray Changer 2 (item no.116438) is available as an option for locations 2 and 4. An easy tape disposal is provided with the integrated automatic tape cutters. Standard height placement station is 830mm. The Windows based station computer with touc h screen monitor is the operators interface to the placement system. Fou r days of basic instructions and pre acceptance at suppliers site per li ne are included in the placement station order. | |
A1D00119605 | Power Supply Conversion Instructions 110V for SIPLACE HF/X-Series/D1/D2/D3. Delivery and conversion are part from the station and free of charge. Attention: If retrofitted at a costumer a voltage savety check (DIN EN 60 204) is necessary. For assistance please ask SIPLACE SMT Service. | |
A1D00119605S02 | Power Supply Conversion Instructions 110V for SIPLACE HF/X-Series. Attention: If retrofitted at a costumer a voltage savety check (DIN EN 60 204) is necessary. For assistance please ask SIPLACE SMT Service. | |
A1D00119610S02 | The Feeder Protection consists of a cover over the feed area (119622, 119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location 2 or 4. | |
A1D00119612 | Transportheight 900mm for SIPLACE X-Series/D3 placement stations. Item No for configuration. A later change brings extra costs on enquiry. | |
A1D00119613 | Transportheight 930mm for SIPLACE X-Series/D3 placement stations. Item No for configuration. A later change brings extra costs an enquiry. | |
A1D00119614 | Transportheight 950mm for SIPLACE X-Series/D3 placement stations. Item No for configuration. A later change brings extra costs on enquiry. |