Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
A1D00119445-01
Manufacturer: SIEMENS
Price: On Request
Mounting Kit, PCB-Barc.HF/X/D3 - SICK06
Similar items in same category:
A1D00119430 | This item is required one time per SIPLACE HS-xx/D4/D1/D2 for installation of one or more PCB-barcode readers (1D-reader or 2D-reader heads). The following items are included: Mounting bracket (2 pcs), Distribution board (1 pcs), Assembly material and cabling. Additionally, one or more PCB Barcode Readers (item 119679 or 119682) are needed.Note: On HS-50 with dual transport a different mounting kit must be ordered (item 119330). | |
A1D00119439 | Pin Module for AVSP (Automatic Vacuum Support Pins) with 24 Support Pins. These Support Pins will be setup in a learning mode to the Topology of a PCB bottom side and can be individually configured with standard or Vacuum cups. This Pin Block must minimum be ordered 1 time per lifting table. For each placement station HS-60/D4 with single conveyor 1 x Retrofitting Kit (AVSP) SIPLACE HS-60/D4 SC 119440 should be present. For each placement station HS-60/D4 with double conveyor 1 x Retrofitting Kit (AVSP) SIPLACE HS-60/D4 DC 119441 should be present. | |
A1D00119440 | AVSP (Automatic Vacuum Support Pins) Retrofit kit for a placement station SIPLACE HS-60/D4 with single conveyor. Consisting of electrical set and pneumatically set,control unit,conversion board and programming box. This must be ordered 1 time per placement station SIPLACE HS-60/D4 with single conveyor. Additionally per lifting table there are up to 3 x Pin Module AVSP SIPLACE HS-60/D4 (119639) required. | |
A1D00119441 | AVSP (Automatic Vacuum Support Pins) Retrofit kit for a placement station SIPLACE HS-60/D4 with double conveyor. Consisting of electrical and pneumatically set, control unit, conversion board and programming box. This retrofit kit must be ordered 1 time per placement station SIPLACE HS-60/D4 with double conveyor. Additionally per lifting table there are up to 3 x Pin Module AVSP SIPLACE HS-60/D4 (119639) required. | |
A1D00119455 | Wide board option offers the possibility to process wide PCBs on an HS60/D4. Therefore it is necessary to do some modifications at the limit switches of y-axis and to move the position of the fixed rail of the conveyor. By use of this option, boards with a width up to 508mm can be handled by an HS60/D4 with single conveyor. For dual conveyor the maximum PCB width is 242mm in dual conveyor mode and 380mm in single conveyor mode. Attention: It is not possible to use synchronous dual conveyor in combination with wide board option. Preconditions: Line software Siplace Pro 2.1 or higher, Station software 505.03 or higher. | |
A1D00119455-01 | WIDE BOARD OPTION OFFERS THE PO SSIBILITY TO PROCESS WIDE PCBS ON ANHS60/D4. THEREFORE IT IS N ECESSARY TO DO SOME MODIFICATIO NS AT THE LIMITSWITCHES OF Y-AX IS AND TO MOVE THE POSITION OF THE FIXED RAIL OF THECONVEYOR. BY USE OF THIS OPTION, BOARDS W ITH A WIDTH UP TO 508MM CAN BEH ANDLED BY AN HS60/D4 WITH SINGL E CONVEYOR. FOR DUAL CONVEYOR T HEMAXIMUM PCB WIDTH IS 242MM IN DUAL CONVEYOR MODE AND 380MM I N SINGLECONVEYOR MODE. ATTENTIO N: IT IS NOT POSSIBLE TO USE SY NCHRONOUS DUALCONVEYOR IN COMBI NATION WITH WIDE BOARD OPTION. PRECONDITIONS: LINE SOFTWARE SI PLACE PRO 2.1 OR HIGHER, STATIO N SOFTWARE505.03 OR HIGHER. | |
A1D00119460 | Fixed conveyor rail right side. To transport two PCBs. Synchronous or as ynchronous transport mode. Item has to be ordered with the placement sta tion. With this new transport the PCB is clamped to top side, that means the placement level is always on the same height, independent from PCB- Thickness. The new transport offers short PCB change time and the possib ility to change easily the fixed rail Right - Left. PCB-dimensions: L x W, Standard: 50mm x 50mm to 368mm x 460mm, Extended dimensions with the Long Board Option: 50mm x 110mm to 610mm x 460mm (508mm extra width on r equest). | |
A1D00119461 | Fixed conveyor rail left side.Item has to be ordered with the placement station. With this new transport the PCB is clamped to top side, that me ans the placement level is always on the same height, independent from P CB-Thickness. The new transport offers short PCB change time and the pos sibility to change easily the fixed rail Right <-> Left. PCB-dimensions: L x W, Standard: 50mm x 50mm to 368mm x 460mm. Extended dimensions with the Long Board Option: 50mm x 110mm to 610mm x 460mm (508mm extra width on request). |