Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

6AG1242-7KX31-7XE0

Manufacturer: SIEMENS

Price: On Request

SIPLUS NET CP 1242-7 V2 -40...+70 °C with conformal coating based on 6GK7242-7KX31-0XE0 . Communications processor CP 1242-7 V2 for connection of SIMATIC S7-1200 to GSM/GPRS network; Web server access to CPU, data point configuration Observe national approvals

Similar items in same category:

	6AG1241-1CH32-4XB0	SIPLUS S7-1200 CM1241 with conformal coating based on 6ES7241-1CH32-0XB0 . Communication module CM 1241, RS422/485, 9-pole D-sub (pin) supports Freeport
	6AG1242-5DX30-2XE0	SIPLUS S7-1200CM 1242-5 -25...+55 ?C with conformal coating based on 6GK7242-5DX30-0XE0 . Communication module CM 1242-5, for connecting S7-1200 to PROFIBUS as DP Slave module
	6AG1242-6TM10-2BB1	SIPLUS ET 200SP TM ECC 2xPWM ST; -30...60 °C With conformal coating Based on 6FE1242-6TM10-0BB1 . Charging controller for conductive charging of electric vehicles according to IEC 61851 with 2 charge outputs; -30 °C...60 °C 2x Control Pilot; 2x plug Preset; 2x DQ switching contact For load contactor as open collector; 2x DI for feedback message; Load contactor or connector lock; 2x ACT for connector lock Suitable for BU type BU20-P12+A0+4B and BU20-P12+A4+0B
	6AG1242-7KX30-4XE0	"*Spare part* ""SIPLUS" "S7-1200 CP 1242-7;"" With" conformal coating based on 6GK7242-7KX30-0XE0 . Communications processor CP 1242-7 for connection of SIMATIC S7-1200 to GSM/GPRS network
	6AG1243-1BX30-2AX0	SIPLUS S7-1200 CP 1243-1 -40...+70?C with conformal coating based on 6GK7243-1BX30-0XE0 . Communications Processor CP 1243-1 for connecting SIMATIC S7-1200 as additional Ethernet interface and for connection to control center via remote system protocols (DNP3, IEC 60870, TeleControl Basic), Security (Firewall, VPN)
	6AG1243-1JX30-7XE0	*Spare Part* SIPLUS S7-1200 CP 1243-1 -40 ... +70?C with conformal coating based on 6GK7243-1JX30-0XE0. COMMUNICATION MODULE CP 1243-1 DNP3 TO THE CONNECTION FROM S7-1200 TO CONTROL CENTRE WITH DNP3 PROTOCOL
	6AG1243-2AA30-7XB0	SIPLUS S7-1200 CM 1243-2 -25...+70°C with conformal coating based on 3RK7243-2AA30-0XB0. S7-1200, CM 1243-2 Communication module AS-Interface master referred to AS-i Specification V3.0
	6AG1243-5DX30-2XE0	SIPLUS S7-1200cm 1243-5 -25...+55 ?C with conformal coating based on 6GK7243-5DX30-0XE0 Communication module CM 1243-5, for connecting S7-1200 to PROFIBUS as DP master module