Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP1800-0WH33-2QG5

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM;

Similar items in same category:

	2LP1800-0RE77-3XM4	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 4; Positioning: Upright; Design: A/B; Rated torque: 6,700 Nm; Ratio: 13.865; Dynamic load rating of axial bearing Cdyn: 1,370 kN;
	2LP1800-0RF14-8EB8	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 4; Positioning: Upright; Design: E/F; Rated torque: 6,700 Nm; Ratio: 13.865; Dynamic load rating of axial bearing Cdyn: 1,370 kN;
	2LP1800-0WE31-5EL1	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 6.088; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM;
	2LP1800-0WE31-8QP5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 6.088; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM;
	2LP1800-0WJ40-4FK8	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 13.939; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM;
	2LP1800-0WJ52-1PQ3	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 13.939; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM;
	2LP1800-0WJ52-5AT7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 13.939; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM;
	2LP1800-0WJ52-8LX2	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 13.939; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM;