Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP1800-0GX73-3LF1

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 15.581; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM;

Similar items in same category:

	2LP1800-0GW56-0FM1	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: C; RATIO = 12.326; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM;
	2LP1800-0GW61-5NG4	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 12.326; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM;
	2LP1800-0GX06-6PV7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 13.806; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM;
	2LP1800-0GX18-3YB2	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 13.806; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM;
	2LP1800-0HA28-6RD3	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 22.006; NOMINAL TORQUE AT LOW-SPEED SHAFT = 10,500 NM;
	2LP1800-0PL60-1WD5	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 7.792; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM;
	2LP1800-0PL61-6QT3	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 4; Positioning: Upright; Design: E/F; Rated torque: 6,300 Nm; Ratio: 6.319; Dynamic load rating of axial bearing Cdyn: 1,370 kN;
	2LP1800-0PM25-6CX2	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 4; Positioning: Upright; Design: E/F; Rated torque: 6,300 Nm; Ratio: 9.722; Dynamic load rating of axial bearing Cdyn: 1,370 kN;